Blazen Off Road HD Rear Bumper, and HD Rear Winch Bumper w/ Tire Carrier --Updated!

[81jimmyslt]

Here it is Stock bolt on replacement, 1/2" grade eight hardware or upgrade to 9/16". Bumper is practically wrapped around the frame horns fro the best departure angle!

Constructed out of 1/4" plate and 1/2" thick shackle mounts, brackets are 3/8". Hardware included.

We only have a two week lead time on all of our bumpers and tire carriers!

Oh and of course you can add side armor, but we have another rear winch plate bumper coming out next week with our drop down tire carrier, ahem fully loaded!

-------------------------------------------------------------------------

The New HD rear winch bumpers are same construction as above but can fit most 12,000 winches inside a sealed compartment with detachable lid and quick access holes. These bumpers have plated side protection and recovery mounts as well. Still has great departure angle for having a winch stick off your back end.

Plus you can add a drop down spare tire carrier to this rear bumper with all the accessories if you need. Add a Hi-Lift jack mount, jerry can mounts, and get your license plate visible too.



DONT FORGET HUGE SALE UNTIL THE END OF THE MONTH. 10% OFF ALL BLAZEN OFF ROAD PRODUCTS AND 5% OFF EVERYTHING ELSE

Now is the time to get your new winch bumper and DROP DOWN tire carriers!

 

[81jimmyslt]

updated with new HD rear winch bumper.

Sale is now going on through March, get your orders in today!

 

[81jimmyslt]

BTTT

Sale is still good till March 31

 

[81jimmyslt]

Sale is over, thanks for all the orders.

 

[colbystephens]

question about the drop-down tire carrier: how difficult is it to lift the unit back up?

 

[81jimmyslt]

With my 40" spare and the hi-lift its not too bad. It pivots pretty good on the bottom bushings, so just a quick lift and its up.

This design allows for easier tire changes thats for sure!

Our drop down carriers, swing down to the ground for super easy tire install and tail gate access.



For the swing out design tire carriers you will have a problem. I don't know about you but picking up a big tire over my waist and trying to put it on the carrier is pretty damn hard with only one person.



Jesse

 

[colbystephens]

thanks - that's what i was debating.

 

[81jimmyslt]

Bumper season is now open

 

[romeolimagolf]

Quick question: (If you have already answered this somewhere I'm sorry, I searched and didn't turn up anything)

How big of a tire will the tire carrier hold? I know you said you have a 40" spare, is that the max? Will it fit 44"s



Thanks

 

[81jimmyslt]

There are three different versions 33"-35", 36"- 40" and 40"-44"

Jesse

 

[81jimmyslt]

Thanks for the orders!!

 

[romeolimagolf]

Quick Question:

Is the plate (or step) on the top of the bumper parallel to the ground? From this picture it looks like it slants down.

 

[81jimmyslt]

It slants down and follows the rear frame horns.

 

[Dafey]

How much for just the bumper and for just the winch bumper , no tire carrier.I`m trying to see if I have enough for both or just the front.

 

[81jimmyslt]

Tire carriers are hot! Keep the orders coming, dont forget to use your tax refund.