CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Blazer "made in Microsoft paint" schematic?

supersize75k5

OrganDonorRacing.com
Joined
Feb 3, 2004
Posts
8,830
Reaction score
36
Location
gilbert az
Years ago someone on here had a handy schematic that was done up in paint or something simple.

It showed the perperctivefrom the engine compartment looking at the bulkhead.

I'm tired, working with a hacked harness, I'm add if not dyslexic and I absolutely hate reading automotive schematics when do not have the patience for this right now.

If it was mine I'd buy a new harness but that's not an option right now.

Trying to wire up bens nightmare and it's a mess.


:1zhelp:
 
82 chevy


ls has stand alone, im fine there.


My hang up is the wiring bulk head for the connector at the firewall. His is cut to hell.

There is what seems to be a couple pink wires around 10 or 12 gauge

purple 10 gauge "should be starter signal" with my memory

then a 10 or 12 gauge red wire that I assume is the 12 volt constant


It has already been a 12 hour day on top of my late night on top of the day before and my brain was just done, looking at printed off circuits was almost enough to melt my brain.
 
Big gauge red wires (there are two) are connected to the battery through fusible links. Pink is ignition out to the old distributor. Purple is starter signal. Green is for the coolant temp sender, tan is for the oil pressure sender. Pink with no stripe is fuel level sender signal.

There are a cluster of 6 or 8 wires for the wiper motor. I'll get the rest for ya'll in a bit...
 

Latest Posts

Top Bottom