CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Blazer parts needed.

FSJeeper

1/2 ton status
Joined
May 6, 2001
Posts
265
Reaction score
0
Location
Texas
I need the following my 1984 CUCV Blazer:

1. Set of good doors, no rust, dents, and windows function well.
2. High Capacity fuel tank.
3. Used lift, 2.5" or 4" with rear spings or shackle reversal.
4. Good seats or at least a passenger seat and base.
5. Everything for a standard transmission conversion. Steering column, linkage, pedals, crossmembers, Bellhousing, etc.
6. A good SM465 with NP205. Will consider NP208 or NP203 versions. Or, a chevy NP435 transmission case or complete transmission. (Have a Dodge NP435 with NP205 I could swap internals with.
7. Anything else interesting as this is going to be a total rebuild.

I am in Houston, Texas
 
I have all the clutch linkage setup, and pedals/brackets, etc bellhousing, flywheel, clutch assbly, 4spd (right now I only have one from a 2wd and one from a 4x4 with a 203 transfercase) also have the gas tank and a Blazer gate with no internals....email if interested in any or all...... [email protected]
 
2 front vynal seats
blue
100$ plus shipping
there is 2 spots on the drivers side that has a crack in the vynal
the seats come with all the mounting brackets

<font color=red>K5: Because size DOES matter</font color=red>
85 K5 4IN LIFT 35 GOOD YEAR WRANGLER MT/R, AMERICAN RACING WHEELS
 
got it all or what ever you dont have sent you a pm and a direct e also

Help!!!!!! Did somebody call the Doctor???? :-}
 
I've got a rebuilt 12 bolt with 3.73's and eaton locker (the factory locker). I'm in Texas and would ship.

<font color=red>Stupid people shouldn't tell other stupid people how not to be stupid</font color=red>

<a target="_blank" href=http://www.bluefox.tv/~lara>My Wonderful Site</a>
 

Latest Posts

Top Bottom