pseudomike
1/2 ton status
Looking for a couple of the metal body mount pucks....upper side. I got the lowers out of LMC but would consider complete sets. Going with pro-thane so rubbers not needed.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Body mounts
- Thread starter pseudomike
- Start date
pseudomike said:
Truck or blazer?
I am about to part my K20 truck this week.
I'm guessing you're needing the '81-'87 truck parts, correct?
pseudomike
1/2 ton status
Yes, I am sorry and you are correct.. 81-87 truck body mounts. I believe they are the same from the rear seat forward on blazers and burbs 81-91. If you have some please let me know. I have a couple from a '91 K5 and one original to the truck...which is a ways off from the six required. I had to replace all of the mounts riveted to the frame if that is any insight to what the rubber end looked like.
pseudomike said:
Mine are fom a 83 K20 and they are in good condition if not perfect.
I will need a few days to get to them, so if you are in a hurry and can get them elsewhere go ahead.
I have been leaving people hanging and I want to be upfront with this.
If I get to them in the next few days i will let you know.pseudomike
1/2 ton status
Truck is currently a rolling chassis. I have a lot of work to do before I make it to the mounts. I could use them in a couple weeks when I put the new cab on but ....I may have 4 usable uppers. A couple weeks would be perfect else I could use 2 or 3 for the rad support.
