bolts on front brake hub on k3500

[k-5s-10]

ok heres the problem, two bolts on the brake hub assembly have rounded heads on them? any ideas to get them out? my rotors are worn down like a half an inch or more and dont even contact the brakes anymore. So i need to get them changed to haul a trailer this week

 

[pierce88K5]

Are you talking about the brake caliper bolts? If so, then a stud removal tool can remove them. If you are talking about the nuts that hold the front spindle on, them place a piece of sand paper over the rounded bolts and hammer on the socket and sometimes that will work. - Wes

 

[pierce88K5]

So, did you ever get them off? - Wes