Bolts

[AUK5]

Hey where is a good place to buy bolts for a 14 bolt ff. I need the bolts that hold the axle in. the guy i bought it from had a bolt in there that wasn't the right size and when i was driving it fell out. thanks

 

[NEK5]

Hold the axle itself into the truck? ie U bolts, or axle shaft into the hub?

 

[AUK5]

axle shaft to the hub

 

[4X4HIGH]

Fastenal will have those bolts. The factory bolts are a serrated flange head bolt. Take a look at this bolt, not sure of the exact dimensions you need but this should be close. http://www.fastenal.com/web/products/detail.ex?sku=19809#caddrawings

 

[dremu]

I just went out and measured one; they're 1/2-13 x 1 1/4", i.e. about an inch of thread and a quarter inch of shank.

I don't remember how deep the threading is in the hub, so 1 1/2" long might be okay.

-- A

 

[4X4HIGH]

I just went out and measured one; they're 1/2-13 x 1 1/4", i.e. about an inch of thread and a quarter inch of shank.

I don't remember how deep the threading is in the hub, so 1 1/2" long might be okay.

-- A

In that case, try these on for size.


http://www.fastenal.com/web/products/detail.ex?sku=19807