Bracket Question

[K5 Jess]

Does anyone know where this goes? Or can someone take a picture of the A/C compressor brackets in there truck? All I took off was the A/C compressor, so it cant go anywhere else. Its driving me nutz! Any help is appreciated!!!!

 

[4X4HIGH]

You're going to need to give details such as year and model of vehicle before you get any help.

 

[K5 Jess]

84 K5. I took the a/c compressor off when I took the stock manifolds off. Now that Ive cleaned up the manifolds, I cant remember how or where this bracket fits in.

 

[4xcrazy]

looks like a lower power steering pump adjusting bracket to be. One hole bolts to the stud on the first exhaust manifold bolt on drivers side, the other hole bolts to another bracket, or a bottom hole on the block, been awhile since i had this setup. Then obviously the adjusting groove where a stud on the back of the pump goes through, loosen the nut and slide the pump to tighten the belt.

 

[K5 Jess]

looks like a lower power steering pump adjusting bracket to be. One hole bolts to the stud on the first exhaust manifold bolt on drivers side, the other hole bolts to another bracket, or a bottom hole on the block, been awhile since i had this setup. Then obviously the adjusting groove where a stud on the back of the pump goes through, loosen the nut and slide the pump to tighten the belt.

Thanks!!! This should help bigtime!

 

[4xcrazy]

after searching for alittle bit, this is about the best i could find, should give you an idea though as to where it goes and how it should attach when you get it in there.

 

[K5 Jess]

Cool! thanks. Im gonna work on my truck this thursday n friday. I want it to run again!!!!!