Anyone have another tailhousing? While redoing the rear seal on the truck we’re fixing up for my son, realized why it was leaking so bad. Lol. Been to junk yards around. No one has a 205 with this housing. Why would this happen?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Broken tail housing.
- Thread starter k5blazerguy
- Start date
454Sub
5/8 ton status
I actually might have one of those left. I'll look tonight.
if you need it for a 205 rear slip yoke i have one on the shelf . send me a pm .
possible if to much lift and short wheel base = short shaft length = to much drive line angles and binds up and something has to give .
possible if to much lift and short wheel base = short shaft length = to much drive line angles and binds up and something has to give .
Kain
3/4 ton status
^^this
Thanks!! I think SweetK30 is sending me one!!! Appreciate all the help!
I've seen one get punched in by the drive shaft after a hard landing on a modified truck (lifted,big tires,etc)--the rear shaft was likely a little too long and it pushed the front yoke into the tail housing...
