johnathan
1/2 ton status
O.K. 84 700r4 I broke the end of the dipstick off when swapping the engine. The cap that seats against the fill tube is gone. I need the measurement from the seating surface to the fill hot mark or end of stick.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
broken tranny dipstick, need measurement
- Thread starter johnathan
- Start date
Confedneck
3/4 ton status
can get it later this evening, however, 28" total length is sticking in my head
700r4 and th350 use the same stick but not the tube.
and good upgrade for older th350 is 700r4 locking stick swap in.
just go junk yard hunting and pull 1 from a car/truck but NOT a van as its way to long.
and good upgrade for older th350 is 700r4 locking stick swap in.
just go junk yard hunting and pull 1 from a car/truck but NOT a van as its way to long.
johnathan
1/2 ton status
In that case I can grab one from the parts store.
on second thought the chitty hp th350 stick would a different length altogether.
on second thought the chitty hp th350 stick would a different length altogether.
Last edited:
johnathan
1/2 ton status
O.K. the dealer says it has been discontinued and I think that making the stick I have now would be the best way to go.....soo anyone with a measurement?
