botboy
1/2 ton status
Oh well. Driving back to ISU my friend was driving while I was asleep in back and ran the truck *almost* dry now she won't start. Heads cracked before, bad enough now that she won't start up. No coolant in my oil and no rod knock to speak of so bottom end is most probably still good.
Damnit
SOLD PARTS:
Top and bottom radiator support brackets/rubber thingys
105 Amp Alternator
4 Core Radiator
Pr 4 gauge wires
Intake manifold W/O EGR (bought to upgrade before truck died) $40 shipped
Parts FS:
6.2 bottom end $75 Incl vacuum pump, fuel pump, water pump you pick up
Stanadyne pump w/injector lines and injectors $150 shipped work good
Intake manifold w/EGR $29 shipped
Isspro 3" pyrometer $45 shipped (no thermocouple - bought to upgrade before truck died)
Heads are going in the scrap pile unless somebody wants them free + shipping BADLY CRACKED
Valve covers $20 shipped
Water crossover $15 shipped
NA exhaust manifolds $50 shipped pr
Engine mounts $40 shipped pr
Starter works fine custom rebuild by a diesel shop in minneapolis $50 + shipping
700r4 with governor for diesel and strong gasser TC (higher stall), low miles works great $200
NP208 Part-time transfer case works fine no noises $100
Take both above for $250 will need to be picked up.
'83 K5 frame, front disks, 4" lift, new front driveshaft, rancho shocks all around (about 3 yrs old), new rancho steering stabilizer (less than 6 months), D44 front w/full time hubs 3.73 open, PS box, GM 10 bolt rear 3.73 open drums. $150 obviously will need to be picked up. Will include tub/front fenders/doors if you want but all have some serious dents and tub is rotted behind seats and in rockers. Will throw in a patch panel for PS front floor and rockers if I still have them.
5x BFGoodrich 33x12.5", 3/4 tread left, on GM 6 lug ralleys $150 set need to be picked up
Buy both above for $250
Fiberglass top free with any purchase you get to pick up. $20 alone still needs to be picked up.
straight hood black w/hinges $45 you pick up
Sun visor (lund style) black fiberglass $50 shipped
Tailgate has rust along bottom and 1 hole near the top, power window works good. $45 you pick up
Truck is currently in ames behind the mechanics shop and is headed back to minnesota friday or saturday. So if you want parts and live in iowa or southern MN, get back to me before then.
I have pictures of some stuff I'm waiting on my sister to send them to me since they're on a digicam at home. Should be on my laptop later today (tuesday)
if you're interested in parts or have questions, email me at botboy60 (at) hotmail.com or post in this thread. Bumps appreciated. Help the poor college student!
If you want the whole truck I would like to get $550 for it since its got a lot of goodies. I'll deliver to within 100 miles of ames, minneapolis, or anywhere in between for free for anyone who wants to buy it as a whole.
Damnit
SOLD PARTS:
Top and bottom radiator support brackets/rubber thingys
105 Amp Alternator
4 Core Radiator
Pr 4 gauge wires
Intake manifold W/O EGR (bought to upgrade before truck died) $40 shipped
Parts FS:
6.2 bottom end $75 Incl vacuum pump, fuel pump, water pump you pick up
Stanadyne pump w/injector lines and injectors $150 shipped work good
Intake manifold w/EGR $29 shipped
Isspro 3" pyrometer $45 shipped (no thermocouple - bought to upgrade before truck died)
Heads are going in the scrap pile unless somebody wants them free + shipping BADLY CRACKED
Valve covers $20 shipped
Water crossover $15 shipped
NA exhaust manifolds $50 shipped pr
Engine mounts $40 shipped pr
Starter works fine custom rebuild by a diesel shop in minneapolis $50 + shipping
700r4 with governor for diesel and strong gasser TC (higher stall), low miles works great $200
NP208 Part-time transfer case works fine no noises $100
Take both above for $250 will need to be picked up.
'83 K5 frame, front disks, 4" lift, new front driveshaft, rancho shocks all around (about 3 yrs old), new rancho steering stabilizer (less than 6 months), D44 front w/full time hubs 3.73 open, PS box, GM 10 bolt rear 3.73 open drums. $150 obviously will need to be picked up. Will include tub/front fenders/doors if you want but all have some serious dents and tub is rotted behind seats and in rockers. Will throw in a patch panel for PS front floor and rockers if I still have them.
5x BFGoodrich 33x12.5", 3/4 tread left, on GM 6 lug ralleys $150 set need to be picked up
Buy both above for $250
Fiberglass top free with any purchase you get to pick up. $20 alone still needs to be picked up.
straight hood black w/hinges $45 you pick up
Sun visor (lund style) black fiberglass $50 shipped
Tailgate has rust along bottom and 1 hole near the top, power window works good. $45 you pick up
Truck is currently in ames behind the mechanics shop and is headed back to minnesota friday or saturday. So if you want parts and live in iowa or southern MN, get back to me before then.
I have pictures of some stuff I'm waiting on my sister to send them to me since they're on a digicam at home. Should be on my laptop later today (tuesday)
if you're interested in parts or have questions, email me at botboy60 (at) hotmail.com or post in this thread. Bumps appreciated. Help the poor college student!
If you want the whole truck I would like to get $550 for it since its got a lot of goodies. I'll deliver to within 100 miles of ames, minneapolis, or anywhere in between for free for anyone who wants to buy it as a whole.
