Built 700R4 RMVB

[RGV72BLAZER]

* Built 700R4, RMVB, 2300 convertor...don't remember specifics on the complete build, but did have clutches and all put it in. Previous owner put a couple of runs on it and decided to go to a manual I think. Put into the drivetrain of my Blazer, but decided to go with a TH350. $900 OBO
* Fitzall Adaptor to mate a 700R4 to a 203 with the stock shaft $50

 

[Recon!]

I'm not very tranny smart, but will this thing bolt in place of the 700R4 already in my truck? Mine is shot and I need a new one.

 

[RGV72BLAZER]

Yes it would, but the RMVB might be a problem for you, since you'd need a new shifter...unless you already have a RMVB. Maybe you could swap the VB between the two trannies...?

 

[Recon!]

All I would have to do is drop the pan and swap them out, right?

 

[RGV72BLAZER]

Sounds right, but I would just double check. I wouldn't want to sell you something & then you can't use it. I'm pretty sure that's all though.

 

[Recon!]

What year is the case for the tranny? There are 2 or 3 different ones, but I can't remember the differences. Is it 4x4 ready? I'm seriously thinking about running it, but I'm a little skeptical. Is there any way you could get in touch with the builder?

 

[RGV72BLAZER]

What year is the case for the tranny? There are 2 or 3 different ones, but I can't remember the differences. Is it 4x4 ready? I'm seriously thinking about running it, but I'm a little skeptical. Is there any way you could get in touch with the builder?

I don't know what year t-case was behind it...I bought it to put my 203/205 doubler behind it. I do know it's a 4wd 700R4 and has the 27 spline output shaft. Let me cross reference some #'s & I will let you know what year GM the 700R4 came out of...

& Nope, can't get in touch with the builder anymore...sorry.

 

[Recon!]

I don't know what year t-case was behind it...I bought it to put my 203/205 doubler behind it. I do know it's a 4wd 700R4 and has the 27 spline output shaft. Let me cross reference some #'s & I will let you know what year GM the 700R4 came out of...

& Nope, can't get in touch with the builder anymore...sorry.

I should have stated that more clearly, I was talking about the transmission case. I'm not sure what spline my 700R4 has, I'll have to check it out when I get back to Texas tomorrow evening. No biggy about the builder, just trying to find the easy way to figure it out.

 

[RGV72BLAZER]

As far as I know, all 700R4s have the 27 spline output shaft. Looked for the ID info yesterday, but did not find it...I'm guessing it was taken off when it was powdercoated...

 

[Recon!]

Hey man, sorry to have taken so long but I am not going to buy your transmission from you, just too many variables. I'm getting mine rebuilt locally.