CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

bunch of stuff needed for suburban.

cwillis

1/2 ton status
Joined
Feb 20, 2008
Posts
133
Reaction score
1
Location
Fayettnam, NC
I need a bunch of stuff for super cheap. Uncle sam diesnt pay that well, and its worse when you have a family of four. lol

so i have an 84 diesel suburban that i am turning into a family-mobile.

I need
good clean carpet
A/C refridgerant (r/12 or HC-12)
seats for the whole suburban. preferably vinyl baby proof type. out of a van?
3/4 ton axles
suspension parts (im stock looking to go bigger)
700r4 parts
transfer case parts
left rear fender
j code 6.2 diesel intake manifold
off road lights
exhaust parts
etc. . .

almost anything you have that you can afford to let go cheaply would be greatly appreciated.


Thanks
Chris
[email protected]
 
lol that depends on what condition it is in and what it has in it. I am poor. . .

I support a family of four (one newborn, one toddler, me and my wife) on E-3 Pay.

So no i cant afford a 60 front. . . I prob cant afford the whole thing. . .

but if you have a couple of the parts, or want to take a good amount of them off of your burb - that would be sick too.

let me know what you have.

Thanks!!!
Chris
 
ive got a j-code intake (actually a complete 6.2 if your interested), a complete 700r4/208 combo that im going to pull out of my truck soon, and ive got a 3/4ton 14bff i just pulled out of my k5 with 3.73's in it. let me know if your interested, im at 22039
 
ive got a j-code intake (actually a complete 6.2 if your interested), a complete 700r4/208 combo that im going to pull out of my truck soon, and ive got a 3/4ton 14bff i just pulled out of my k5 with 3.73's in it. let me know if your interested, im at 22039

oh yeah i am def interested in all of it. I dont think i can afford all of it though. let me know how much you want for each part and i will see what i can do. . .

Thanks again
Chris
 
i think the only 6.2 parts i need are the J-code intake and maybe some humvee headers.
ohh and the oil cooler hose.
 
thanks for all the replies!

I need prices on all the stuff you guys have. please PM me s we can work this stuff out!
 
$75 for the J-code intake

$300 for the complete 700r4/208 combo

$150 for the 14bff with 3.73's

take all 3 for $450
 
$75 for the J-code intake

$300 for the complete 700r4/208 combo

$150 for the 14bff with 3.73's

take all 3 for $450


I am interested i nthe intake, what condition is that in?
I am interested i nthe 700R4 but not the 208. how does the 700 shift?
and the 14bff, i am going to have to find a gear calculator. . . never heard of one shallower than 4.10. . .
 
I am interested i nthe intake, what condition is that in?
I am interested i nthe 700R4 but not the 208. how does the 700 shift?
and the 14bff, i am going to have to find a gear calculator. . . never heard of one shallower than 4.10. . .

the j-code intake is still on my k30, and was a running truck, so should be in very good shape. the 700r4 shifts fine from what i can tell, its still in my '88 k5, so its one of the stronger 700r4's (changed some of the internals in '87 i believe). ill be swapping in a th400 soon, so i could pull it whenever if your interested. ive also got a set of 4.10's on carrier with good carrier bearings and welded spider gears i can include with the axle for $50 if you are interested in that.
 
haha i wish. . . tiny little air force base. maybe if i knew anyone on bragg. I think there has to be something like 5 humvees on base. All the rest are JSOC's and uh. Nothing accidently dissapears out of the dumpster at JSOC. know what i mean?
 
haha i wish. . . tiny little air force base. maybe if i knew anyone on bragg. I think there has to be something like 5 humvees on base. All the rest are JSOC's and uh. Nothing accidently dissapears out of the dumpster at JSOC. know what i mean?
:doah:
 
Top Bottom