cam question

[77scottsdale]

how well would this perform on a stock rebuilt 92 lo5 30 overbore, with performer intake long tube headers and a 600 dp holley. says it makes its power from 600-4600 that is about where the l05 heads run out

cam specs at summit racing

 

[Thunder]

It will work good. Good torque cam. With the TBI heads you should have very good low end power I would also change the valve springs. The stock springs on the TBI heads are pretty weak.

 

[Bent77]

I have almost identical cam in mine, runs great, lots of low end. Like thunder said, replace the springs, I wouldn't feel bad about looking at the push rods, rockers, and adj nuts while you are at it. These things are all pretty inexpensive to replace while it's apart.