Can I get a picture

[lak2004]

of someones TBI 350 w/700r4 and the throttle linkage/tranny linkage. I dont know what I am missing but what I have wont work I dont think. Thanks

 

[pauly383]

My TBI 350 is a 93 , it has a 4l60e and the bracket has an empty hole where the TV cable should go . But the bracket is correct all the way back to 87 .

The throttle cable bracket had two openings ( well 3 but you use the lower two ) , a small one for throttle cable , and a large one for the TV cable . It should be easy if its stock . If not stock your gonna need the right bracket of a junk truck .

Heres an internet pic of the correct bracket ( its on an older motor that was converted , but its the correct bracket for an 87-93 ) :

 

[GNERGY]

On the mounting bracket the top square hole is for the cruise control vacumn actuator.
The second hole is the throttle cable and the bottom hole is for the tranny cable.
This pic is of the throttle body cable connections. The one that isn't connected is the cruise control.
I can take a better pic tomorrow if you need.
Tarey

 

[lak2004]

Thanks guys, I need to get that bracket too I guess. Anyone know where I can get one either used or aftermarket or something? No junk yards close to me.

 

[carpeonnel]

so is it just the bracket you need for all the cables to mount to?

 

[johnnychimpo]

This ones from a '90 Suburban.

 

[lak2004]

so is it just the bracket you need for all the cables to mount to?

Yep, sure is.