What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

check out this k5...350 with 600HP

A .450 lift cam dosen't sound much of a lift either. Is he getting the 600 hp dynoed from all the stickers on the back window :rotfl: :rotfl: :rotfl: :rotfl:
 
I call bull****. 600HP through an Edelbrock Performer RPM? .450 isn't much either. Sounds like its got quite a bit of compression.'

sure looks like a 208 to me

someday folks will realize that cam lift is one of the less important specs of a camshaft.

idles pretty smooth too

missing a breather on the motor. If that thing is 600Hp it cost a pretty penny and he doesn't care about a breather?
 
My 355 sounds like like that on open headers...

Not only that, but with 600 horses, I'd expect her to up and go a whole lot harder than she did...
 
Sounds nice... Thats not a 203. I am skeptical of the 600hp, very skeptical. Performer and a Holley with no juice? ehhh My Olds468 with a Torquer and a holley does not even come close to 600hp. Who knows...I need to put more stickers on my boat so it will go faster. :D
 
And what inna hell is that thing hangin off the front bumper?
 
The 'Apron' helps keep mud/water out of the engine bay when hitting a hole real hard. Of course it would accomplish the same thing if it was tied up and back...

600 hp...don't think so.

Rene
 
I expected to see a much longer parts list than darts, .450 cam, and a performer carb for a 600 hp motor....

must be running nitro.... :rotfl: :screwy: :surepal:
 
Sounds like a motor that used to make about 375 horses. Going by the lack of maintenance, it's got more bark than bite left to it.

I, personally, like how they made NP203s that were identical to NP203s.
 
You must log in or register to reply here.

Latest Posts

Top Bottom