CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
LA Chevy Dana 60 $200?
- Thread starter UpnAdam
- Start date
Should say 60 on the driver side lowering webbing.
Afaik, GM never used 3.54's. It's also a rear chunk because there's no spring perch. Since it's a rear there's a 99% probability it's 30 spline.
I haven't seen it in person I was just curious. I didn't catch the lack of a spring perch, thanks!
yep 3.54 ratio super popular on ford rears .
and only 70's got 35 spline rear shafts if I recall.
if its a power loc posi its a good unit just under a Detroit .
easy to rebuild and or swap out the spider gears only to make 35 spline.
I would offer 150 after popping the cover to see the style of posi . if its a power loc unit . . . = 2 piece carrier .
and only 70's got 35 spline rear shafts if I recall.
if its a power loc posi its a good unit just under a Detroit .
easy to rebuild and or swap out the spider gears only to make 35 spline.
I would offer 150 after popping the cover to see the style of posi . if its a power loc unit . . . = 2 piece carrier .
GM did use 3.54 in pre-73 trucks...buddy has a 71/72 with a 402, 60 rear, P/L and 3.54s. All per the RPO sticker in the glove box.
Has a Dodge yoke.
