CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
***** CK5 garage sale, lots of cool stuff *****
- Thread starter CK5
- Start date
JohnSPledg
1/2 ton status
1615 Marshall Dr.
Baton Rouge, La 70808 or if a business address is better,
3465 Cedarcrest Ave
Baton Rouge, La 70816.
Baton Rouge, La 70808 or if a business address is better,
3465 Cedarcrest Ave
Baton Rouge, La 70816.
redneck60164
1/2 ton status
i want the diff cover shipping would be to 60164 let me know
BigRed89
1/2 ton status
Put me next in line for the diff. cover please. Thanks! /forums/images/graemlins/thumb.gif
Put me next in line on those pimpin' sun visors
RingMaster4x4
1/2 ton status
Paid
[ QUOTE ]
i want the diff cover shipping would be to 60164 let me know
[/ QUOTE ]
OK, where do you live, UPS only shows 37.35 at the cheapst thats 2nd day air, no 5 day is offered????? /forums/images/graemlins/dunno.gif
i want the diff cover shipping would be to 60164 let me know
[/ QUOTE ]
OK, where do you live, UPS only shows 37.35 at the cheapst thats 2nd day air, no 5 day is offered????? /forums/images/graemlins/dunno.gif
[ QUOTE ]
1615 Marshall Dr.
Baton Rouge, La 70808 or if a business address is better,
3465 Cedarcrest Ave
Baton Rouge, La 70816.
[/ QUOTE ]
I will try to get a shipping quote for you this weekend, have to be creative packaging it. /forums/images/graemlins/thinking.gif
1615 Marshall Dr.
Baton Rouge, La 70808 or if a business address is better,
3465 Cedarcrest Ave
Baton Rouge, La 70816.
[/ QUOTE ]
I will try to get a shipping quote for you this weekend, have to be creative packaging it. /forums/images/graemlins/thinking.gif
spearchucker
1/2 ton status
[ QUOTE ]
I will try to get a shipping quote for you this weekend, have to be creative packaging it.
[/ QUOTE ]
A 2x4 or 2x6 frame around it with each side covered with 1/4 inch plywood should work.
I will try to get a shipping quote for you this weekend, have to be creative packaging it.
[/ QUOTE ]
A 2x4 or 2x6 frame around it with each side covered with 1/4 inch plywood should work.
JohnSPledg
1/2 ton status
Tack weld a support across the bottom, and sandwich it in double or triple thick card board. That should do the trick just figure shipping insured incase they boog it up I can at least make a claim.
staceydude
Registered Member
1973-1975 Blazer/Jimmy windshield frame, no rust at all, this is what you need to make a 1976-1991 full convert that will accept a factory hardtop, I just would like what I have into it: $70.00
I would like to be in line for this windshield frame.
I am in Dallas area 76020 Zip.
I know that the other fella is in line before me but I saw it was not posted as sold.
Can I make a suggestion on shipping. 2x4s and 2X6s will weigh to much. I suggest some simple 2X2s along the bottom of the frame. Makeing a pocket for each leg to fit in. This will be pretty dame secure. Then wrap it in thick platic or carboard and take it to Greyhound. Or hell duck tape the whole frame and forget the platic. As long as it has a little bit of support it should not tweak. Greyhound shipped a huge Mustang Bumper cover for me and it was much cheaper than anywhere else.
Another suggestion is to sell me that UAV cage cheap and include the window frame as a gift.... /forums/images/graemlins/smile.gif and those cool seats as well..... /forums/images/graemlins/cool.gif
Seriously, If the other party does not want to mess with the frame or the cost of shipping please let me know.
[email protected]
Best regards,
Stace
I would like to be in line for this windshield frame.
I am in Dallas area 76020 Zip.
I know that the other fella is in line before me but I saw it was not posted as sold.
Can I make a suggestion on shipping. 2x4s and 2X6s will weigh to much. I suggest some simple 2X2s along the bottom of the frame. Makeing a pocket for each leg to fit in. This will be pretty dame secure. Then wrap it in thick platic or carboard and take it to Greyhound. Or hell duck tape the whole frame and forget the platic. As long as it has a little bit of support it should not tweak. Greyhound shipped a huge Mustang Bumper cover for me and it was much cheaper than anywhere else.
Another suggestion is to sell me that UAV cage cheap and include the window frame as a gift.... /forums/images/graemlins/smile.gif and those cool seats as well..... /forums/images/graemlins/cool.gif
Seriously, If the other party does not want to mess with the frame or the cost of shipping please let me know.
[email protected]
Best regards,
Stace
redneck60164
1/2 ton status
i sent you a pm
RingMaster4x4
1/2 ton status
Got the Rock Rod /forums/images/graemlins/grin.gif /forums/images/graemlins/woot.gif /forums/images/graemlins/whistling.gif Thanks
BTW TTT
BTW TTT
botboy
1/2 ton status
1973-1975 Blazer/Jimmy windshield frame, no rust at all, this is what you need to make a 1976-1991 full convert that will accept a factory hardtop, I just would like what I have into it: $70.00
How much to ship this to Delano, MN 55328? Do you take paypal? Please email me I'll take it right now if shipping won't kill me, I want my '83 to be a full convertible. [email protected].
How much to ship this to Delano, MN 55328? Do you take paypal? Please email me I'll take it right now if shipping won't kill me, I want my '83 to be a full convertible. [email protected].
I think there is a couple of people in line in front of you unless they don't want it. I took it to UPS yesterday while I was shipping something else to get a recomendation, and they said try Greyhound because of all the oversize fees that UPS and fedex would charge.
staceydude
Registered Member
[ QUOTE ]
How much to ship this to Delano, MN 55328? Do you take paypal? Please email me I'll take it right now if shipping won't kill me, I want my '83 to be a full convertible. [email protected].
[/ QUOTE ]
I think you are third in line for this. Heck I don't know. I think it is already sold though.
I also would take it as posted above. He must be off wheeling and having fun /forums/images/graemlins/cool.gif /forums/images/graemlins/peace.gif
How much to ship this to Delano, MN 55328? Do you take paypal? Please email me I'll take it right now if shipping won't kill me, I want my '83 to be a full convertible. [email protected].
[/ QUOTE ]
I think you are third in line for this. Heck I don't know. I think it is already sold though.
I also would take it as posted above. He must be off wheeling and having fun /forums/images/graemlins/cool.gif /forums/images/graemlins/peace.gif
Kyburbn
Registered Member
Steve, could you ship the windshield frame? The only reason I ask is because I am stationed in Korea right now and won't be back home til June 05. The other option is I may be coming out to CO in Dec when I come home on mid tour leave. Not sure on the CO thing yet. Just shoot me you thoughts, if it goes it goes, ain't the end of the world. 40162 in the zip back in KY for me.
