Cleanin out garage

[protechk5]

205 factory skid plate- i think it should fit in a flat rate box- $20 plus shipping

56" rear Tuff Country Ez ride 4" springs- they are in like new condition, barely used. SOLD

I have a pair of 3" rough country lift blocks- $10
and some stock 3" blocks for like a Dodge - $10

Chevy d60 spring plates- someone drilled a few hole for zero rates-sold
Dodge d60 spring plates- $15

Factory front tow hooks off a 88 k5- $15

Front m1008 Shackles with mounts- sold

Rear m1008 bumper with shackles (i know one is missing in the picture but i have it). Has a receiver hitch welded to bottom, i used to tow light stuff around. I can remove it if you dont like it. Also it does not come with the pintle hitch in picture, I have the stock one that I will include but I think I have all the hardware to mount it. This bumper is beefy, no rust or dents.
$100

Hydro fork, its missing the clip on it, but you can easily take one off any other fork and tack weld it on there. Its never been used. - $20

 

[CUCV2]

Do you have any pics of the 4" lift 56" rear springs?

 

[protechk5]

yeah ill take some tomorrow when its light

 

[CUCV2]

Could you look into shipping to 05641 as well? Thanks.

 

[protechk5]

Ok sorry for the crappy pictures, I needed the centering pin for another set of spring I had. Im going to my spring shop today to get new ones and get these back together. Like I said before, these springs were barely used. They were only on my truck 2-3 months, only wheeled once. I took them off cuz I did 4-link.

 

[protechk5]

could you look into shipping to 05641 as well? Thanks.

$40

 

[protechk5]

ttt

 

[kgblazerfive]

Man I'm looking for a set of 56 with a bit of a lift, wonder what they would do in the front, as far as how much lift.

 

[rob75]

ill take the dana 60 spring plates do you take paypal?

 

[protechk5]

Man I'm looking for a set of 56 with a bit of a lift, wonder what they would do in the front, as far as how much lift.

As they are, 8" total. If you took a leaf or two out, 5-7" but they would be soft, but flex like crazy. Or take some leafs out of these and replace them with a stock leaf you can get what ever you want, just have to play with it.

 

[protechk5]

ill take the dana 60 spring plates do you take paypal?

Sure do $25 shipped sounds good, but i wont be home til sunday so cant send them out til Monday. lll send them flat rate so 3-4 day from then. [email protected]

 

[protechk5]

ttt

 

[blazin_blazer]

how about these shipped to 72143

Front m1008 Shackles with mounts- $80

dibs for consideration upon shipping cost...& fitment/yr

does the mounts mount the bumper also? any idea of yr b/c i found out the hard way that the front bumpers changed some at some point..i think there were only 2 bumper profiles/diff mounts 73-80/pre-81 and 81-87/91 subs, but i'm not sure, anyone know for sure?..i need the newer 85 style bumper mounts, although i could use either if i had to in a pinch

 

[shaun89]

are the springs sold!?

 

[Meen Green]

i want front shackles and mounts if, blazin passes on them!

shipping to 68428?

 

[protechk5]

are the springs sold!?

yep springs sold

 

[protechk5]

how about these shipped to 72143

Front m1008 Shackles with mounts- $80

dibs for consideration upon shipping cost...& fitment/yr

does the mounts mount the bumper also? any idea of yr b/c i found out the hard way that the front bumpers changed some at some point..i think there were only 2 bumper profiles/diff mounts 73-80/pre-81 and 81-87/91 subs, but i'm not sure, anyone know for sure?..i need the newer 85 style bumper mounts, although i could use either if i had to in a pinch

pm sent

 

[protechk5]

i want front shackles and mounts if, blazin passes on them!

shipping to 68428?

ok ill let you know if he takes them or not

 

[blazin_blazer]

yea, i want the shackles and mounts ..i'll pay-pal you the money tomorrow...is that your pay-pal addy in post #11?

 

[blazin_blazer]

i'd like to have that rear bumper also, but shipping would prolly kill that deal, but you may could just put a label on it & ship...any idea what it weights?