FatBoyBlazer
1/2 ton status
what does it mean...my truck at startup sounds like its got a big cam but it doesn't then i seems to runn normal with the check light on....can any body /forums/images/graemlins/1zhelp.gif
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
code 12
- Thread starter FatBoyBlazer
- Start date
code 12 is the normal code to have...you will always get that when you check codes..any trouble codes will come after that flashes 3 times.
ZonkRat
1/2 ton status
Poss the oxy sensor isn't working right till it earms up,making it run rich till then?Just a thought,some one here should have more ideas. /forums/images/graemlins/thumb.gif
FatBoyBlazer
1/2 ton status
thats what it seems like i just put headers on it and had the o2 sensor welded in to the collector
angrysnowplow
1/2 ton status
Might have to get a heated O2 sensor...that should warm that sumbitch up to the 5 or 600 degrees it needs to be at real quick. /forums/images/graemlins/thumb.gif
I got a Bosch one- supposed to be 'universal'. Has 3 wires. Black one-same as stock O2
Two white ones- one ground, one tied in to be hot w/ the key on. I tapped a fuel pump wire, supposedly a lot of people do that.
Just wait for a few more opinions before you go and spend the $60 /forums/images/graemlins/k5.gif
I got a Bosch one- supposed to be 'universal'. Has 3 wires. Black one-same as stock O2
Two white ones- one ground, one tied in to be hot w/ the key on. I tapped a fuel pump wire, supposedly a lot of people do that.
Just wait for a few more opinions before you go and spend the $60 /forums/images/graemlins/k5.gif
FatBoyBlazer
1/2 ton status
im also getting a code 13 and 33
FatBoyBlazer
1/2 ton status
aparently a 13 is the o2 and a 33 is a mass airflow..i just dosconected the battery for the night and i'll see if it runs better after a few days
angrysnowplow
1/2 ton status
Just found this post, was in Canada, Eh /forums/images/graemlins/thumb.gif
I don't think you have a mass airflow sensor... /forums/images/graemlins/thinking.gif
Did clearing the codes change anything?
I don't think you have a mass airflow sensor... /forums/images/graemlins/thinking.gif
Did clearing the codes change anything?
87BrnRsd
1/2 ton status
Code 33 is for the MASS sensor if you have tpi, mpi, or efi. I am assuming you have tbi, in which case code 33 means MAP sensor. This is the manifold absolute pressure sensor. It is $27.99 at autozone.
-Harrison
-Harrison
FatBoyBlazer
1/2 ton status
what side do i disco the neg or pos? /forums/images/graemlins/1zhelp.gif
angrysnowplow
1/2 ton status
neg. should do it
FatBoyBlazer
1/2 ton status
alrighty thanks
Save yourself some hassle (radio presets for instance) and pull the ECM fuse. /forums/images/graemlins/laugh.gif
FatBoyBlazer
1/2 ton status
will do
