I am planning on ripping my 205 transfer case and 4spd out and replacing it a 3pd autotrans and transfer case out of a 76 blazer..What will I all need?I figure I'll need a new rad, trans crossmember,a floor shifter but not sure what else i might need..driveshaft??front/back??both? anything else I'm missing? oh yea and I'm not sure about the wireing for the neutral safty switch and the bacj up lights
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Converting
- Thread starter win717
- Start date
83ZZ502_Jimmy
1/2 ton status
If you get a B&M megashifter, it will come with the neutral switch and backup light switch.
You will need a new radiator. Trans crossmember should be fine, but you will need the correct adapter and rubber mounts to bolt it on.
I dont know on the driveshaft. Some have to be changed, some dont. Mine did not require changing at all.
You will need the hard lines from the tranny to the radiator.
John
You will need a new radiator. Trans crossmember should be fine, but you will need the correct adapter and rubber mounts to bolt it on.
I dont know on the driveshaft. Some have to be changed, some dont. Mine did not require changing at all.
You will need the hard lines from the tranny to the radiator.
John
