what is the cost to rebuild a stock 350? not looking for high performance. would like to get longevity
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
cost to rebuild 350?
- Thread starter wazzabie
- Start date
buy a good you hear running used or get a stock or slight performance built reman. then you get warrenty. and its cheeper for both.
and if used motor hear it start dead cold. and look at temp gauge and fell motor for dead cold. might sound quiet warm and crap cold.
and if used motor hear it start dead cold. and look at temp gauge and fell motor for dead cold. might sound quiet warm and crap cold.
moneypit_K5
1/2 ton status
theres a million ways to answer that question. It all depends on what you want to reuse, and what condition the engine is in to begin with.
i would guess you will spend an average of 900-1500 do have a shop build it for you.
How much are the Goodwrench crate engines now days? They use to be a decent deal at $1200.
Martin
Martin
original balzer
1/2 ton status
I have rebuilt them with MINIMAL machine work for under $800.
I have seen people get away with no machine work and just the cost of the kit. IF you have a very clean engine to start with I suppose new rings bearing and gaskets would work, but not with my luck.
I wouldnt rebuild one without a new cam and timming chain and gears.
so for maybe $300 with ZERO machine work. I still think its risky.
I have seen people get away with no machine work and just the cost of the kit. IF you have a very clean engine to start with I suppose new rings bearing and gaskets would work, but not with my luck.
I wouldnt rebuild one without a new cam and timming chain and gears.
so for maybe $300 with ZERO machine work. I still think its risky.
original balzer
1/2 ton status
Last I checked a plain jane stock 350 from goodwrench was $2200 but thats a NEW engine not a rebuilt. Thats a pretty good deal still I think.
