Is anyone running stock 56's up front with crossover that can measure the length of the drag link with the bends in it? Would like to get all the parts ready before I teardown for the swap. Will be getting Dom locally and bending myself. Thanks!
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Crossover drag link length w/56's
- Thread starter POORBOYK5
- Start date
I'm assuming you don't have crossover?
I can't help in that case but if you have crossover why wouldn't the drag length be the same length as any other spring length setup?
I have arms, steering box, pitman arm, rod ends. Wasn't sure if lift height made any difference in the length of rod or the bend?
To an extent yes, It's more about the offset bend that is needed to keep the ends happy. Only real way to know is once it's got it's own weight on it.
There maybe someone that can get it close enough that the ends can safely take up the difference.
There maybe someone that can get it close enough that the ends can safely take up the difference.
I'll prob just call and order one from you guys to keep it simple and correct. 
Stomis
Professional Amateur
I'll prob just call and order one from you guys to keep it simple and correct.
Call ORD or WFO for a draglink. Honestly for the cost its not worth trying to replicate. Both companies have the bends down pat to clear the crossmember.
