lnnayers
Newbie
i would like to run crossover steering with a 2 inch, is this possible?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
crossover steer question from a newb
- Thread starter lnnayers
- Start date
min 4" is the standard . or you run in to clearance problems and wrong angles.
that's pretty straight forward
the draglink will have very little room between the frame and leaf spring, plus the pitman arm (not parallel with leaf spring) would be too close for anything outside of a road queen. I went to a Ford van pitman arm for my 4" lift cause the standard one sold drops too far.
the draglink will have very little room between the frame and leaf spring, plus the pitman arm (not parallel with leaf spring) would be too close for anything outside of a road queen. I went to a Ford van pitman arm for my 4" lift cause the standard one sold drops too far.
We can definitely do crossover steering with 2" of lift, it requires a flatter pitman arm (we would include that in the kit) and our high clearance engine crossmember.
