Crossover Steering =============

[81jimmyslt]

Dana 44 steering arms
Dana 60 Arms
D44knuckles
tie rod ends
heim joints
jam nuts
pitman arm
Custom Tie Rods and Drag links DOM or SOLID STOCK!!
Full crossover steering kits, highsteer too!
Full D44 flat top knuckle and arm kits
Studs
7/8" Taps for the DIY guys
D60 Springless stud hardware
D60 springless caps
D60 knuckle rebuild kits


We also have Toyota steering stuff!

It's not on the website yet, just holler for some prices!

Thanks,
Jesse Kruger
www.blazenoffroad.com
[email protected]
530-416-7902

 

[BILTIT]

ok, i will bite. Whats your price on crossover for a D60 for an 80 chev with 6'' lift?

 

[81jimmyslt]

$269 arms and arp stud kit
$269 Tie rod and drag link kit includes all ends and rods

$568 shipped

You will probably still need a new pitman arm and 2wd sector shaft or steering box.

Jesse

 

[MTBLAZER89]

Hey Jesse,

Price of one D60 crossover arm for TRE's.

Got pics? Whose arms do these compare too? Solid? Welded Cap?

 

[81jimmyslt]

Parts Mike made! Springless arm setup. Crossover arms, highsteer arms and boomerang setup. $275 for the kit shown.

 

[81jimmyslt]

Bttt

 

[81jimmyslt]

Keep em coming

 

[BGKYK5]

How much for just the passenger side arm for D60 crossover (non-high steer)?

 

[81jimmyslt]

$139 for arm, and hardware, new bushing..

 

[Chaddy]

Price tag for the double arm?

 

[81jimmyslt]

$275 for the double arm setup or boomerang setup.

 

[blazin' j]

how much for complete hi-steer x-over set up(dana 60)???

 

[mnstrburbon]

How much for a d44/10 bolt i already have the 2wd box i need everything else.
? on the heavy duty 1 ton tie rods (I think) do you have to re taper for these to work. currently a 3/4 ton 10 bolt.

 

[81jimmyslt]

How much for a d44/10 bolt i already have the 2wd box i need everything else.
? on the heavy duty 1 ton tie rods (I think) do you have to re taper for these to work. currently a 3/4 ton 10 bolt.

$209 for the arm set with studs.

$269 for any tie rod drag link end setup. This goes for D44, D60

We do have many pitman arms too.

If it has a 1" shank yes you will need to retaper. The 1104 pitman arm usually does not need to be reamed.

 

[81jimmyslt]

how much for complete hi-steer x-over set up(dana 60)???

$538 arms hardware, studs, drag link, tie rod and all ends.

Still need a 2wd sector shaft or box and pitman arm.

 

[81jimmyslt]

Many kits sold, Thanks!

 

[81jimmyslt]

Man 44 highsteer kits are popular! Wheres all the D60's?

 

[BIGCHEVYTRUCKDRIVER]

Quote for D44 complete setup Crossover, and high steer. I have 2x4 box and flattops need drag link and tie rod and arms cones and washers.

 

[AJs72K5]

Bump. Jesse, can you PM me the holiday price on a complete D44 crossover steer setup for a 72 Blazer with a 6" lift (Alcan springs)? Arm, TREs, draglink, stud kit, and pitman arm.