Wanted D-side vent window and rear taillight harnes for M1008

[CUCV2]

Looking for a drivers side vent window assembly and a rear tail light harness for an M1008. The part of the harness that is needed is from the plug that comes off the rear of the frame near the bumper and goes to the taillights themselves.

 

[kennyw]

Looking for a drivers side vent window assembly and a rear tail light harness for an M1008. The part of the harness that is needed is from the plug that comes off the rear of the frame near the bumper and goes to the taillights themselves.

I think that part of the harness is common with pickup and Suburban of the same year range.

 

[sweetk30]

m1009 blazer i am working on has extra wires for the black out lights and stuff in the harness .

have you posted or looked on steel soldiers ?

 

[kennyw]

m1009 blazer i am working on has extra wires for the black out lights and stuff in the harness .

have you posted or looked on steel soldiers ?

Ah, I would have expected that to be an additional harness like on the trucks.

 

[CUCV2]

m1009 blazer i am working on has extra wires for the black out lights and stuff in the harness .

have you posted or looked on steel soldiers ?

Not yet. I may try that if something doesn't turn up sooner. Seems like there are quite a few guys with CUCVs here. I wonder if there is something for trailers on the M1008s since it has the pintle hitch.

 

[sweetk30]

i just remembered i might have one . i got a m-1028 in the back of the shop ready for part out soon . but its been half civi converted and new york rust belt life .

 

[CUCV2]

i just remembered i might have one . i got a m-1028 in the back of the shop ready for part out soon . but its been half civi converted and new york rust belt life .

Do you have any pics? I could get away with just the glass if that is all that is in good shape. I'd have to learn how to install it is all. The complete assembly is pretty easy to take out once the door panel is off.

 

[CUCV2]

i just remembered i might have one . i got a m-1028 in the back of the shop ready for part out soon . but its been half civi converted and new york rust belt life .

Does it have a taillight harness per chance?

 

[sweetk30]

i got a few sets of wing windows . most have decent glass but the upper pivot point is cranky and or lower metal frame the glass is in is rusted bad .

truck was on the road s should have harness . i got to finish blazer then its coming in the shop for tear down .

 

[K5 PLOWER]

Looking for a drivers side vent window assembly and a rear tail light harness for an M1008. The part of the harness that is needed is from the plug that comes off the rear of the frame near the bumper and goes to the taillights themselves.

I have a driver side vent window from my 89 K5 if your still looking.

 

[CUCV2]

I have a driver side vent window from my 89 K5 if your still looking.

Apparently, LMC sells them and that is where I ended up getting this. Thanks all the same.