CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
D44 torque
- Thread starter NoSmog73
- Start date
smokkey1
1/2 ton status
#145 IIRC
84_Chevy_K10
Banned
Put the impact on them and let it hammer until it can't tighten them any more.
Check them periodically afterwards, new ones will stretch.
Check them periodically afterwards, new ones will stretch.
Wrong answer.
Here is the proper specs for different size U-bolts.
5/16" = 15-18 ft. lbs.
3/8" = 28-32 ft. lbs.
7/16" = 30-35 ft. lbs.
1/2" = 65-80 ft. lbs.
9/16" = 75-90 ft. lbs.
5/8" = 85-110 ft. lbs
Here is the proper specs for different size U-bolts.
5/16" = 15-18 ft. lbs.
3/8" = 28-32 ft. lbs.
7/16" = 30-35 ft. lbs.
1/2" = 65-80 ft. lbs.
9/16" = 75-90 ft. lbs.
5/8" = 85-110 ft. lbs
[ QUOTE ]
Wrong answer.
Here is the proper specs for different size U-bolts.
5/16" = 15-18 ft. lbs.
3/8" = 28-32 ft. lbs.
7/16" = 30-35 ft. lbs.
1/2" = 65-80 ft. lbs.
9/16" = 75-90 ft. lbs.
5/8" = 85-110 ft. lbs
[/ QUOTE ]
I was waiting for you... /forums/images/graemlins/waytogo.gif
Wrong answer.
Here is the proper specs for different size U-bolts.
5/16" = 15-18 ft. lbs.
3/8" = 28-32 ft. lbs.
7/16" = 30-35 ft. lbs.
1/2" = 65-80 ft. lbs.
9/16" = 75-90 ft. lbs.
5/8" = 85-110 ft. lbs
[/ QUOTE ]
I was waiting for you... /forums/images/graemlins/waytogo.gif
I also replied to your other post on NCOR but without as much detail. /forums/images/graemlins/thumb.gif
smprider112
1/2 ton status
ya impact gun...prolly would work if u had a Big tank and big hose...but if yer runnin a weeny lil 5Gal tank with the stock tiny hose...yer prolly gonna get 85ft/lbs outta it...so thats prolly not the best general answer to give unless u specify /forums/images/graemlins/waytogo.gif
