8t7jimmy said:
thanks for the order!, will get it turned up and shipped out asap.
thanks again to all you CK5'ers who have ordered my driver, it is greatly apreciated
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
D60/14ff Hub Bearing Race & Seal installation Driver.
- Thread starter rdn2blazer
- Start date
thanks for the order!, will get it turned up and shipped out asap.
thanks again to all you CK5'ers who have ordered my driver, it is greatly apreciated
muddyblzr
1/2 ton status
anybody got a picture of this thing for the non-paying members
muddyblzr said:
I can try to send you a regular e mail with a pic of it. pm me with you e mail addy. need to go through my yahoo so I can add an attachment. dont think it will let me add an attachment from here.
muddyblzr
1/2 ton status
nvm just ordered my membership
Last edited:
8t7jimmy said:
8t7jimmy, your driver will ship Tuesday as promised
thank you for your order, it is appreciated.
rob
rdn2blazer said:8t7jimmy, your driver will ship Tuesday as promised
thank you for your order, it is appreciated.
rob
I got it! It is exactly as advertised. I am very happy. You a great vendor to deal with.
I do have one question for you. Can you make me an interchangeable bottom section for a D44? Or even a whole set of these? Maybe a Chevy set - All the ones you need for a Chevy! I know other companies do make the other sizes, but i would rather give my money to a follow member than someone I have never heard of! Even if this isn't a possibility, you have a great product and i will recommend it to everyone!
Thanks
Ryan
8t7jimmy said:
thanks Ryan!
I really just dont have the time to do a full set and the extra cost for tooling would not be worth it to me. If I hade the right lathe it would not be a big deal but with my little lathe it is not really for production machining.
I bought a set at the auto swapmeet for cheap that work fine. I just fill the void for the bigger bearing race and seal.
still making these if anybody needs one, just let me know.
***UPDATE***
As of MAY 1st the price will go up to $45 dollars shipped for this tool. the cost of Aluminum is high, the cost of shipping comes out of my end of the price of the tool, and with gas prices such as they are its becoming not worth my time to make these anymore. BUT I still WANT to make them for my fellow CK5ers who might need them.
so if you order before MAY 1st they will be the $40 dollar shipped price. so get your orders in before then if you think you need one. hate to do this but its either a price increase or I quit making them. hope this is not taken harshly.
rob
As of MAY 1st the price will go up to $45 dollars shipped for this tool. the cost of Aluminum is high, the cost of shipping comes out of my end of the price of the tool, and with gas prices such as they are its becoming not worth my time to make these anymore. BUT I still WANT to make them for my fellow CK5ers who might need them.
so if you order before MAY 1st they will be the $40 dollar shipped price. so get your orders in before then if you think you need one. hate to do this but its either a price increase or I quit making them. hope this is not taken harshly.
rob
jekbrown said:BTT, kick ass product.
j
thanks jek, your still my hero brother.
mini_mull
1/2 ton status
Ordered via paypal. Let me know when to expect it. Thanks.
mini_mull said:
you have a PM, thank you for your order. details in the PM.
mini_mull
1/2 ton status
Got mine today.
Here's some pics w/ a Pepsi for a little perspective on size just for fun.
Here's some pics w/ a Pepsi for a little perspective on size just for fun.
mini_mull said:Got mine today.
Here's some pics w/ a Pepsi for a little perspective on size just for fun.
good, you got it. was wondering if it showed up on time. hope your happy with it, it will serve you well.
just loosen by hand and finger on the screw, flip, thread the flat head allen screw in as far as you can, put your finger on it and hand sinch, should not have to use an allen wrench to tighten, ofcourse, Im sure you allready figured that out. thanks for the order.
anyone ever have a problem with yours just let me know, I will take care of it.
rob
jekbrown said:that looks like the pencil-**** version... I got the limited edition "big shaft" version.
j
you have'nt turned that "tool" into a multi use tool I hope
j/k
