PARTSGUY
Registered Member
Just as the title states, I need a 4" lift steering arm for a D60. I figure they should be pretty inexpensive as more and more people are going to the crossover setup.
Curtis
Curtis
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
d60 push pull 4" steering arm
- Thread starter PARTSGUY
- Start date
owenst7
1/2 ton status
I have a stock steering arm, you could use a block with it I suppose...
Don't know if that helps at all, but you can have it for the ride from Reno.
Don't know if that helps at all, but you can have it for the ride from Reno.
The only thing I know of for the stock type on D60's is to use a Dodge arm and have it welded and retapered by Kert.
Doing so will put the DL on top of the arm rather than how Dodge ran them under. This arm will be very close to 4" raised.
Doing so will put the DL on top of the arm rather than how Dodge ran them under. This arm will be very close to 4" raised.
or a drop pitman arm for the steering box. i use 1 on my k30 with 4" lift works great.
and i used a block years ago. i got ride of it quickly didnt like it. kept coming loose .
and i used a block years ago. i got ride of it quickly didnt like it. kept coming loose .
I have a lift block if interested with all the studs.
I also have a lift block and studs if your interested.
