magnum4x4
Registered Member
I need a complete Dana 60 Cross Over steering setup, i need arms, tierod, drag link, 2wd steering gear, everything!!!! Please Help!!!
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
D60 X-Over Steering
- Thread starter magnum4x4
- Start date
Cross over steering
Hi, I have the complete piece that goes from the pitman arm down to the steering knuckle. Main tube is from ORD. Has a high quality heim on the pitman arm end and a standard tierod end at the knuckle. It is missing the rubber boot. If you are interested, I'll take $75 for the whole thing. It;s like new, I only had it on my truck for a month before parting it out. If you would like a picture, I can send one.
Thanks,
Steve
Hi, I have the complete piece that goes from the pitman arm down to the steering knuckle. Main tube is from ORD. Has a high quality heim on the pitman arm end and a standard tierod end at the knuckle. It is missing the rubber boot. If you are interested, I'll take $75 for the whole thing. It;s like new, I only had it on my truck for a month before parting it out. If you would like a picture, I can send one.
Thanks,
Steve
nomadman
1/2 ton status
magnum4x4 said:
I have a good 2WD steering box. I'm in CT, not too far from MD for shipping. I'd take $50 for it + the ride. Might be able to pull the shaft if that's all you want along w/ the pitman arm. It's out of an '86 Chevy 1/2 ton LWB. You can have the pump too if you want it............PM if interested. Jim.
