destinbeachman
1/2 ton status
I have noticed on several parts lists for online parts shops that they list lockers and other parts for 30 spline D60's.I thought all D60 inner shafts were 35 splines.What gives?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
D60's-all 35 spline inners?
- Thread starter destinbeachman
- Start date
Randy92782
1 ton status
Maybe this will help??
All GM / Chevy versions were passenger side differential, regular rotation (low pinion) gears, disc brakes, 35 spline inners, 30 spline outers, internal style hubs, and kingpin knuckles.
All GM / Chevy versions were passenger side differential, regular rotation (low pinion) gears, disc brakes, 35 spline inners, 30 spline outers, internal style hubs, and kingpin knuckles.
Rear dana 60s could have 19, 30, 32 (maybe?) and 35 spline shafts.
Front 60's could have 32 (later model Dodge) or 35 spline inners (just about everything else)
If you saw a listing for a 30 spline dana 60 its for a rear end.
Front 60's could have 32 (later model Dodge) or 35 spline inners (just about everything else)
If you saw a listing for a 30 spline dana 60 its for a rear end.
Last edited by a moderator:
destinbeachman
1/2 ton status
Right on,I was actually looking at the bible just now so I went back and took a closer,slower look.I have used info from it several times but somehow overlooked the little bit about the undesirable 60's from Dodge,Ford,etc. that had 30 and 32 spline inners.Mine is from a CUCV.For some reason I had it in my head that all 60's were 35 spline.Thanks
