camiswelding
1/2 ton status
Cleaning out my k collection....descriptions are not complete but do basically represent what is being offered, items represented may have MORE options than stated
1989 CALIF v3500 reg cab, 350 tbi, 465/205, d60...4.10... the following are NEW (7) tires, batteries, 2 ga cables,3 inch turbo exhaust with performance cat, alternator, p/s pump (hydroboost), condensor, a/c compressor (converted to r134),5 inch superlift kit/shocks, braided stainless brake lines, new rotors, bearings,tie rod, new seals throughout,new seat, new windshield, belts, all fluids
shaved front fenders, killer push bumper/with tow hitch
9 foot utility body, ex forest service truck I purchased at auction... I have 11k invested in this truck... it runs excellent, needs paint (badly faded forest service green) and minor bodywork)
this truck gets excellent fuel mileage, clean calif title,108k original miles, I have been the only owner since fed, it is calif SMOG legal
giveaway........ 4500.00
1981 CALIF chevy blazer rolling chassis, clean truck
d60 and 14b (4.56)both have only 2700 miles on them, NEW rancho 4 inch kit with ord shackle flip in the rear, NEW braided stainless brake lines, NEW ord H.D shckles, NEW greasable bushing kit front and rear, NEw poly busings and 1 inch ORD bodylift, unique stainless plate front bumper,custom rear carrier bumper, ord steering brace,ord box brace, clean frame no cracks or damage ever, calif title, owned by me 10 years, never abused or used heavy off road
Body is fully stripped and disassembled, boxed rockers, doors, front clip, dash cut out, many misc parts, this is a project and you need to be mechanically familiar with k trucks/welding and fab to put it together... additional running gear listed below
1500.00 ******* THIS IS SOLD SOLD SOLD*******
Late model th400/round 205 complete ...out of excellent running truck, no convertor or driveshafts 600.00
Complete setup to convert to stick including the following:
fresh reman 205, 32 spline converted
sm465 excellent shape with a new,custom 32 ORD 32 spline short shaft kit (not installed)
model 203 front for the doubler setup (actual doubler adapter is not included in this deal)
swing pedals, hydro bellhousing slave/clutch cylinder etc
model sm465/203 cast iron adapter for the conversion
1000.00
thanks for looking
cam
1989 CALIF v3500 reg cab, 350 tbi, 465/205, d60...4.10... the following are NEW (7) tires, batteries, 2 ga cables,3 inch turbo exhaust with performance cat, alternator, p/s pump (hydroboost), condensor, a/c compressor (converted to r134),5 inch superlift kit/shocks, braided stainless brake lines, new rotors, bearings,tie rod, new seals throughout,new seat, new windshield, belts, all fluids
shaved front fenders, killer push bumper/with tow hitch
9 foot utility body, ex forest service truck I purchased at auction... I have 11k invested in this truck... it runs excellent, needs paint (badly faded forest service green) and minor bodywork)
this truck gets excellent fuel mileage, clean calif title,108k original miles, I have been the only owner since fed, it is calif SMOG legal
giveaway........ 4500.00
1981 CALIF chevy blazer rolling chassis, clean truck
d60 and 14b (4.56)both have only 2700 miles on them, NEW rancho 4 inch kit with ord shackle flip in the rear, NEW braided stainless brake lines, NEW ord H.D shckles, NEW greasable bushing kit front and rear, NEw poly busings and 1 inch ORD bodylift, unique stainless plate front bumper,custom rear carrier bumper, ord steering brace,ord box brace, clean frame no cracks or damage ever, calif title, owned by me 10 years, never abused or used heavy off road
Body is fully stripped and disassembled, boxed rockers, doors, front clip, dash cut out, many misc parts, this is a project and you need to be mechanically familiar with k trucks/welding and fab to put it together... additional running gear listed below
1500.00 ******* THIS IS SOLD SOLD SOLD*******
Late model th400/round 205 complete ...out of excellent running truck, no convertor or driveshafts 600.00
Complete setup to convert to stick including the following:
fresh reman 205, 32 spline converted
sm465 excellent shape with a new,custom 32 ORD 32 spline short shaft kit (not installed)
model 203 front for the doubler setup (actual doubler adapter is not included in this deal)
swing pedals, hydro bellhousing slave/clutch cylinder etc
model sm465/203 cast iron adapter for the conversion
1000.00
thanks for looking
cam
