Dana 60 brake caliper size

[reddog64]

The dana 60 is the 10 mm one correct 3/16”IF @ frame, 10mm banjo
rear is all the same ¼”IF @ frame, 3/16” T-outs

Putting together what i need for brake lines...

 

[4X4HIGH]

Banjo bolt on a D60 is 10mm and 3/16" hard line into the rubber/stainless braided hose. The rear are usually 3/16" hard line but i have also seen 1/4" hard line as well.

 

[reddog64]

Thanks!

Didnt feel like ordering 2x...

 

[k5 krawler 50]

my rear at the frame was 1/4", and its an 82' for what its worth..