Dana 60 hub socket

[Cucv_M1008]

Which is the correct socket I need for my 60 hubs?

 

[nvrenuf]

It’s a 4 prong socket, they are typically identified by application rather than physical size. You’ll find they are classified by 1/2 & 3/4 ton vs 1 ton.

Check parts stores in the Lisle Tools brand. In the past I ordered a spare from Harbor Freight for the tool box in my Blazer.

 

[cheavyk10]

So there is a cheap version and then the one with the slots that is preferred so the lock tabs don't get messed up. I scored a used Snap On S6146 off of eBay for $50.

 

[Hogback Fabrication]

Some use 6 prongs also, and there's a smaller version of the 4 prong one for 1/2 and 3/4 ton stuff that's way more common in parts stores than the Dana 60 one. Best to count and measure.

 

[Cucv_M1008]

So there is a cheap version and then the one with the slots that is preferred so the lock tabs don't get messed up. I scored a used Snap On S6146 off of eBay for $50. View attachment 428493

Only of you were closer