Dana 70 front centersection

[1-tonmudder]

Dodge Dana 70 front centersection from a early 70's W300.Tubes will be cut off 4-5 inches from the center,Comes with caps.$150 and the ride from 37743.

 

[thatK30guy]

What are the o.d. of the tubes?

 

[1-tonmudder]

 

[muddybuddy]

hmm just curious, could you see how much it would be to ship to 22039. would you be able to box it up or would you still have to send it on a pallet?

 

[1-tonmudder]

Around $35.I'll wrap it in a trash bag and put it on UPS,

 

[muddybuddy]

hmm this is so tempting, let me think about it and let you know, im gona price everything else out first and see what it would cost. thanks

 

[grendel]

How much would be left over, tube end to tube end?

 

[1-tonmudder]

If you just want the ends I can cut it 1/2 way up the tube on each side,but this is a closed knuckle/drum brake axle.That was the reason for cuttin it up.

 

[b454rat]

There is 2 of these in yards here, I't tempted to do the same thing...One has 4.88s in it....if you ever see one in person, they are huge!!!!

 

[grendel]

If you just want the ends I can cut it 1/2 way up the tube on each side,but this is a closed knuckle/drum brake axle.That was the reason for cuttin it up.

I would want the most tube left.

 

[1-tonmudder]

I can cut it right at the end's where the ball start's.

 

[grendel]

I can cut it right at the end's where the ball start's.

Great, what is that measurement?

 

[1-tonmudder]

49-1/2 give or take a 1/8.

 

[1967k10]

Not to hijack your thread but if one cuts them right at the ball do you have enough left to just weld inner C's on and come out around 70" WMS??

 

[1-tonmudder]

I dont have the outters to measure so I honestly have no idea.