2High4U
1/2 ton status
Trying to get some money together to fund my project so I can get a rolling frame again and clearing out the garage im sure going to miss seeing this garage art.
Front and Back Bumpers
Tailgate from my 73 blazer I think I still have the glass for it
4 Inch Lift Springs
Nitrous Works 50 - 300 Adjustable Shot Nitrous Kit With Bottle
Full Exahst System True Dual Exiting On Each Side Of The Rear 1/4 Panel Behind The Wheels No Cats
Soft Top Fast Trac Black Denim And Black Windows Only Used For A Month Before My Teardown
Dana 44 Front Converted to 8 Lug With 4" Lift SS Brake Hoses and New Steering Stabalizer
4:11 gears I think.
350 - 1987 and up TBI Center Bolt Heads this was from a dump truck and was seized then broke free was told that it runs with a knock got this from my grandfather
This does not include the following...
TB, Alternator, Fans, Pulleys, Distributor, And Belts
350 - 1987 and up Carb Center Bolt Heads This comes with everything(Performer Intake Manifold and 1406 Edelbrocl Ele Choke Carb) but the flexplate is from a 92 camaro so you will need to buy a different flexplate or starter to make this one run. This engine was a rebuild from Recon and has less than 4k Miles on it
350 - 1986 and down non Center Bolt Heads Team G Intake Manifold The motor ran but was sluggish and probably needs to be refreshed with rings and bearings and timing chain I did not tear down and inspect anything but it may need a new cam the oil was always clean.
This does not include the following...
Timing Chain Cover, Harmonic Blancer, Carb, Alternator, Fans, Pulleys, Distributor, And Belts
TH-350 - Rebuilt with less than 4k miles on it
203 Transfer Case - Came from the K5 when I bought it
I might have the receipts on the motor and tranny still I will have to chack on that.
Im looking for a lot of stuff so trades and offers are welcome.
If you want a picture Let me know
Front and Back Bumpers
Tailgate from my 73 blazer I think I still have the glass for it
4 Inch Lift Springs
Nitrous Works 50 - 300 Adjustable Shot Nitrous Kit With Bottle
Full Exahst System True Dual Exiting On Each Side Of The Rear 1/4 Panel Behind The Wheels No Cats
Soft Top Fast Trac Black Denim And Black Windows Only Used For A Month Before My Teardown
Dana 44 Front Converted to 8 Lug With 4" Lift SS Brake Hoses and New Steering Stabalizer
4:11 gears I think.
350 - 1987 and up TBI Center Bolt Heads this was from a dump truck and was seized then broke free was told that it runs with a knock got this from my grandfather
This does not include the following...
TB, Alternator, Fans, Pulleys, Distributor, And Belts
350 - 1987 and up Carb Center Bolt Heads This comes with everything(Performer Intake Manifold and 1406 Edelbrocl Ele Choke Carb) but the flexplate is from a 92 camaro so you will need to buy a different flexplate or starter to make this one run. This engine was a rebuild from Recon and has less than 4k Miles on it
350 - 1986 and down non Center Bolt Heads Team G Intake Manifold The motor ran but was sluggish and probably needs to be refreshed with rings and bearings and timing chain I did not tear down and inspect anything but it may need a new cam the oil was always clean.
This does not include the following...
Timing Chain Cover, Harmonic Blancer, Carb, Alternator, Fans, Pulleys, Distributor, And Belts
TH-350 - Rebuilt with less than 4k miles on it
203 Transfer Case - Came from the K5 when I bought it
I might have the receipts on the motor and tranny still I will have to chack on that.
Im looking for a lot of stuff so trades and offers are welcome.
If you want a picture Let me know
Last edited:
