Delete

[Metrodps]

Scored a complete SCI dealer/OEM add on can't tell it from factory parts. Plug a go.

 

[only 31s]

what parts?

do you need underhood or the column stuff?i have a 90 jimmy with the parts.i wont charge you much for uunder hood -but to dissasemble the steering column is out !how bout 40+shipping for anything cruise related under the hood?

 

[Metrodps]

I will scan the areas, I do not need the trun signal arm part. I will post it saturday. But sounds like we may have a deal!

 

[kennyw]

You might also want him to grab the wiring that comes thru the firewall into the interior that plugs into the column (its easy to get out). Then all you would have left is to buy a steering column with the cruise switches already on it.

 

[Metrodps]

You might also want him to grab the wiring that comes thru the firewall into the interior that plugs into the column (its easy to get out). Then all you would have left is to buy a steering column with the cruise switches already on it.

Yes I need the wiring but might have everything I need from jekquistk5. I will know on the third. I did the tilt allready and it had the cruise switch.

 

[Metrodps]

OK I need the wiring for the cruise these pics show what I need plus the switch and bracket that goes over the brake pedal.

Control unit.

The servo unit

 

[kennyw]

I have a complete cruise control wiring harness off of a 1985 Suburban 6.2L diesel truck. Some of it will work for you, at least the in cab section of the harness is the same. Under the hood it will probably be the same harness but the diesel harness is longer. I even have the little brain box and pedal mounted switch and maybe still have the bracket for the switch.

How does $40 shipped sound?

 

[Metrodps]

See what you have and PM me

 

[kennyw]

I'll have to dig it out tomorrow night and get you some pics. Time for bed for tonight.

 

[kennyw]

I haven't completely forgot about this yet... just been short on time. I'll try to get it this weekend.

 

[kennyw]

Here are some pics of what I have...

Engine end.

Grommet thru firewall looks worse in pic for some reason. Wires are not frayed just the plastic tape.

Electrical connections near the bottom of the column (red wire provides power from the fuse panel, black wire clips on ground terminal under dash).

Vacuum switch, control box, etc.

 

[Metrodps]

Got a new SCI Dealer add on unit. $105.00