Kain
3/4 ton status
delete
Last edited:
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
delete
- Thread starter Kain
- Start date
Thou shall not delete
Kain
3/4 ton status
having trouble with reinstalling my axle after axle bearing swap. i thought i had it but i was denied and it wont go back in.
Spline not engaging to the spider gear?
Kain
3/4 ton status
ya thats were its stuck
Kain
3/4 ton status
wont engage fully, its a gov lock if that helps
Kain
3/4 ton status
think they sold me the wrong bearing
Check it against the old one, there should be a number on the old one. Web search it see if the part numbers interchange
prob sold him 1 for a s-10 blazer 10bolt rear .
Hammer time...........
Kain
3/4 ton status
right bearing. i thought it was a no no to hammer it in
I was joking. Guess I need to work on my internet humor.
I'd pull the shaft out and see if the splines may have been chingered up. It only takes a small chip to make them not slide in.
I slide a screwdriver blade down each spline and file any spots that hang up. A few minutes with a file will make it slide well.
I slide a screwdriver blade down each spline and file any spots that hang up. A few minutes with a file will make it slide well.
Kain
3/4 ton status
got it
Kain
3/4 ton status
compressed air in the splins had trash in em
