Wyomingboy
1/2 ton status
Folks,
I'm building a 383 from my L-98 short block(2 bolt main) with less than 20,000 miles on it.
Going to use Bow Tie vortec iron heads, small port big valves(251cfm @ .5"),
10:1 CR, 3.75" stroke w/ 6" rods, long tube headers, with 2.5" true duals.
The cam will be a Lunati roller, 60110, with 262/270 adv duration, 211/219 @ .50 w/ .540"/.555" lift w/ 1.6 roller tip rockers.
Does anyone have a Desktop Dyno or similar program that can tell me what the HP & Torque ought to be for this combo? I haven't decided on the fuel injection system yet and kind of wanted to see what the HP would be and projected flow requirements for an injection system.
Thanks in advance !
I'm building a 383 from my L-98 short block(2 bolt main) with less than 20,000 miles on it.
Going to use Bow Tie vortec iron heads, small port big valves(251cfm @ .5"),
10:1 CR, 3.75" stroke w/ 6" rods, long tube headers, with 2.5" true duals.
The cam will be a Lunati roller, 60110, with 262/270 adv duration, 211/219 @ .50 w/ .540"/.555" lift w/ 1.6 roller tip rockers.
Does anyone have a Desktop Dyno or similar program that can tell me what the HP & Torque ought to be for this combo? I haven't decided on the fuel injection system yet and kind of wanted to see what the HP would be and projected flow requirements for an injection system.
Thanks in advance !
