Just formulating some plans right now. This weekend I'll be cutting aluminum so hope to make some serious headway at that time.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Did you guys know the selection is unlimited?
- Thread starter cybrfire
- Start date
Just formulating some plans right now. This weekend I'll be cutting aluminum so hope to make some serious headway at that time.
Probably calling tomoro. Any time better for you to take stupid calls?
order placed.
thanks for the help! timing is perfect bcuz i'm wanting to burn them in the day after thanksgiving.
Last edited:
just an idea that i havn't seen anywhere yet, would you be interested in making a bolt on front shock hoop where i can use longer shocks in almost vertical. just a thought. am gonna be trying it myself but figure you could make a much nicer version.
just an idea that i havn't seen anywhere yet, would you be interested in making a bolt on front shock hoop where i can use longer shocks in almost vertical. just a thought. am gonna be trying it myself but figure you could make a much nicer version.
Been asked about similar in the past and would like to do something. Just don't have an appropriate set up vehicle at the ready just yet.
Mountain_man
1/2 ton status
Would be awesome. With the changes I'll be going through front hoops will surely be needed.
CherryK5
1/2 ton status
Orbitrol and bracket
Kert hooked me up with a steering control valve and cut a custom bracket for me. Im no longer impressed when i buy kerts parts because i already know im getting the best. Its hard to be surprised when everything is always overdone and meant to take abuse it will rarely see.
10/10 as always
Kert hooked me up with a steering control valve and cut a custom bracket for me. Im no longer impressed when i buy kerts parts because i already know im getting the best. Its hard to be surprised when everything is always overdone and meant to take abuse it will rarely see.
10/10 as always
Kert hooked me up with a steering control valve and cut a custom bracket for me. Im no longer impressed when i buy kerts parts because i already know im getting the best. Its hard to be surprised when everything is always overdone and meant to take abuse it will rarely see.
10/10 as always
Thanks Cherry! This is one of those pieces that most certainly could be made of something thinner and be strong enough, however, sometimes there is more to materail selection than meets the eye.
Pics of 76zimmers new skids -
Could that t-case skid be modified to support the trans & t-case assembly? (Specifically a 91 with a 4spd & Douber?
) If so, I see a a bunch of potential since there is no product like this currently available by anyone.
Could that t-case skid be modified to support the trans & t-case assembly? (Specifically a 91 with a 4spd & Douber?
) If so, I see a a bunch of potential since there is no product like this currently available by anyone.
Pics of 76zimmers new skids -
Could that t-case skid be modified to support the trans & t-case assembly? (Specifically a 91 with a 4spd & Douber?
There'd have to be more to it then what you see here. These were designed with deflection in mind specifically. Would just need more structure.
Would it be worth it or crazy expensive?
I need to do something for my doubler. Just using 2 OE crossmembers works but they're bulking and still offer no protection.
I need to do something for my doubler. Just using 2 OE crossmembers works but they're bulking and still offer no protection.
I think it could be done reasonably priced just whether or not we can get together on the design.
Ok, good to know. Let me get passed my motor project and we'll talk. 
Ok, good to know. Let me get passed my motor project and we'll talk.
Sounds like a plan.
diff covers
Kurt, is your dana 60 diff cover kit a weld-over-existing or a complete diff cover that you weld/assemble yourself? I've gotta buy something direct so I can get some stickers... I've got lots of your suspension stuff now that I got from Keith....
Kurt, is your dana 60 diff cover kit a weld-over-existing or a complete diff cover that you weld/assemble yourself? I've gotta buy something direct so I can get some stickers... I've got lots of your suspension stuff now that I got from Keith....
Ring and center plate kit is more meant to be a stand alone cover type kit.
Lots of guys will opt for just the ring and use that with the existing cover to keep the stock one from peeling.
rock sliders for a k30 with a side mount gas tank ?
