Gravel Maker
1/2 ton status
Thanks!
We will try and keep one in stock for you.....They move!
We will try and keep one in stock for you.....They move!
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Diff Covers, Screaming Deals, new options available....
- Thread starter Gravel Maker
- Start date
readymix
3/4 ton status
Do the unwelded D60 covers come with fill plugs, holes, or anything along that line? They are shown with and without in the pics.
sandawgk5
3/4 ton status
readymix said:
Youve got PM
Ira
Could you give me a quote delivered to 94538 and this would be for a welded D60 cover. Do you have any ready to ship?
Gravel Maker
1/2 ton status
A D60 cover would be.....
$110 - CK5 10% = 99 + $9.45 to ship anywhere in the US, we have them ready to go, I think we have 10 or 11 left, more to weld Tuesday.....For 2 there is only 1 shipping charge, we can fit 2 in 1 box.....
$110 - CK5 10% = 99 + $9.45 to ship anywhere in the US, we have them ready to go, I think we have 10 or 11 left, more to weld Tuesday.....For 2 there is only 1 shipping charge, we can fit 2 in 1 box.....
So what payment method do you take or prefer? Visa, Paypal, Debit card? I'm assuming that if i order one monday morning i would see it in about a day or two since i'm only about 2 hours away from Sac.
Gravel Maker
1/2 ton status
We take orders only from the website.....
We prefer Paypal because you can use CC, Debit, Echeck.....lots of options, we usually work Saturday and the covers are shipped through the USPS in flat rate boxes because they are halfthe price of UPS, they are 3 day priority boxes, usually within CA 1 day delivery.....
We prefer Paypal because you can use CC, Debit, Echeck.....lots of options, we usually work Saturday and the covers are shipped through the USPS in flat rate boxes because they are halfthe price of UPS, they are 3 day priority boxes, usually within CA 1 day delivery.....
Ok, i just sent you the cash via paypal. 
One D60 cover on it's way. Now i'll be able to finish my hydro assist once my ram gets here.
One D60 cover on it's way. Now i'll be able to finish my hydro assist once my ram gets here.
sandawgk5
3/4 ton status
Same here I ordered 2 on Thursday so Brian and I can get our hydro systems going . I ordered the unwelded kit so we could locate the fill plug where we wanted. I will post pics when they get here
Ira
. I ordered the unwelded kit so we could locate the fill plug where we wanted. I will post pics when they get here Ira
Diff cover showed up today.
This thing is beefy and looks great.
This thing is beefy and looks great.
Gravel Maker
1/2 ton status
I'm glad you like it.....show us some pics when you put it on.....
We are welding covers all day tommorrow again, hopefully it stays cool here and not 100 degrees, its going to be hot enough, we are shooting to weld 100 covers tommorrow with only 3 guys welding. I am going to be standing around with a whip to get them all done. We will be welding 3 new covers Friday and need to get a huge stack of covers out of the way, we are having a very difficult time keeping them on the shelves. I'm guessing 9-10 hours of welding = 4 hours of drinking, lets see if they make it to work Thursday, just to recover so they can do it again on Friday.
We are welding covers all day tommorrow again, hopefully it stays cool here and not 100 degrees, its going to be hot enough, we are shooting to weld 100 covers tommorrow with only 3 guys welding. I am going to be standing around with a whip to get them all done. We will be welding 3 new covers Friday and need to get a huge stack of covers out of the way, we are having a very difficult time keeping them on the shelves. I'm guessing 9-10 hours of welding = 4 hours of drinking
, lets see if they make it to work Thursday, just to recover so they can do it again on Friday.
Do you make tie rods at all? I'm looking for a 1.5" x .375" DOM tie rod for my D60. If you can do this give me a price including shipping to 94538 please.
Gravel Maker
1/2 ton status
We try to stay away from steering stuff.....
There are so many doing that, and most of them are good......When I need Tie Rods I let Luke in the shop next door whip some up. He uses .375 dom and GM 1 ton TRE's.....pretty reasonable......4x4labs in Grass Valley
And we got 87 covers welded today!
There are so many doing that, and most of them are good......When I need Tie Rods I let Luke in the shop next door whip some up. He uses .375 dom and GM 1 ton TRE's.....pretty reasonable......4x4labs in Grass Valley
And we got 87 covers welded today!
Gravel Maker
1/2 ton status
10 & 12 bolt covers are coming.....
are still 5-7 weeks to out....
are still 5-7 weeks to out....
Last edited:
grimjaw
1/2 ton status
I just placed an order for a D60 and 14bolt diff cover. I can not wait to test them at tellico in July.
sandawgk5
3/4 ton status
I am still waiting on mine
. Damn you US Postal Service
Ira
. Damn you US Postal Service Ira
Gravel Maker
1/2 ton status
It is usually 1 day in CA.....
It will certainly arrive tommorrow......But don't damm them, the Flat Rate box system is another way to keep prices down.
And Grimjaw, yours will go out tommorrow, we welded about 200 Shackle Hanger Brackets today, just got back to the office.
It will certainly arrive tommorrow......But don't damm them, the Flat Rate box system is another way to keep prices down.
And Grimjaw, yours will go out tommorrow, we welded about 200 Shackle Hanger Brackets today, just got back to the office.
sandawgk5
3/4 ton status
Gravel Maker said:
Yep it was meant more as a joke kinda like shaking my fist at "the gods"
. No worries. I am going to enjoy the weekend camping on the beach in San Onofre on Camp Pendelton. Ira
