Rhino6678
1/2 ton status
does 74-76 DODGE powerwagon have a dana 60 front????
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Dodge Power Wagon
- Thread starter Rhino6678
- Start date
Only if it's a 1 ton, they have a 1/2 ton and 3/4 ton D44 just like Chevy did, but it didn't have locking hubs, just a big nut in the center. Their D60 did have locking hubs though.
Errmmmmm...if it's that early I think the Dana 60 is one of the old style that's maybe D44 strength. 77 ish was when Ford, Dodge, and GM started with the "modern" style D60 the way I heard.
I know with Fords and Dodges the rare 4x4 1 tons had Dana 44 fronts same as the 3/4 ton.
I know with Fords and Dodges the rare 4x4 1 tons had Dana 44 fronts same as the 3/4 ton.
Rhino6678
1/2 ton status
so if its the early 60 its a 60 housing with a 44 housing
Smaller course splined axleshafts, smaller U-joints, sealed knuckles, and other OOOOLD tech that make it worth crap.
A 10 bolt from the 80's is better than a 60's era Dana 60.
A 10 bolt from the 80's is better than a 60's era Dana 60.
Rhino6678
1/2 ton status
so how would i tell becuase the guy dosent really no he just says a front and rear for 100 bucks its worth the drive if it is
Stomis
Professional Amateur
Ughh just fyi somewhere along the lines in the 80s I believe dodge switched 3/4 tons to 60s front and rear.
if it had a cummins.
If it's got a sealed knuckle you don't want it.
In fact if it's from before 77 or so you don't want to even bother.
In fact if it's from before 77 or so you don't want to even bother.
