jtrapani
1/2 ton status
I want to take the power windows out of my 85 and put them in my 74. But I want the door panels to look original. (no empty holes where the crank was). Will the panels from a later model fit in the 74?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Door panel question
- Thread starter jtrapani
- Start date
just square out the orignal panel crank hole and install the switch.
jtrapani
1/2 ton status
that could be an idea. thanks.
I don't think the inner door has all the provisions to mount the power setup. That's why the door panels covered a larger area when power became an option.
Mounting the stuff inside can be done.
The panels and inner door skinds are different though, while it can fit up and screw down, they'll be gaps. The 73-76 panels stop halfway down and there's a big ridge there, that a full lenght panel will have to ride over. It can be modified to fit, but it's not a bolt up deal. You'll be drilling the door and cutting the panel to make it fit right.
The panels and inner door skinds are different though, while it can fit up and screw down, they'll be gaps. The 73-76 panels stop halfway down and there's a big ridge there, that a full lenght panel will have to ride over. It can be modified to fit, but it's not a bolt up deal. You'll be drilling the door and cutting the panel to make it fit right.
