pennsylvaniaboy
1/2 ton status
ok so i know this is a sorta like beating a dead horse but here are my options and questions
A. do i use my sm465(not sure on adapter prolly 10 spline) w/205 what i would like to do is add a divorced 205 and create a doubler but not sure if i can clock first 205 to clear rear 205. this idea being that i can run a hydro motor of the orignal front output or even a pto.
B. find a sm465 with a 205 and then do a 205 doubler. this would mean finding a new tranny combo instead of current one. and thus fine a 32 spline 205 from a th400 which i dont have.
C. run a th400 w/ a 203 already on it and still find a 205 from a th400.
i currently dont know whats output/input the current combo is in the truck and have a spare sm465 10spline tranny and 205 but tranny is torn apart due to the normal sm465 kick out.
i really like the idea of twin 205s and then having pto abilities as these winchs never fail.
A. do i use my sm465(not sure on adapter prolly 10 spline) w/205 what i would like to do is add a divorced 205 and create a doubler but not sure if i can clock first 205 to clear rear 205. this idea being that i can run a hydro motor of the orignal front output or even a pto.
B. find a sm465 with a 205 and then do a 205 doubler. this would mean finding a new tranny combo instead of current one. and thus fine a 32 spline 205 from a th400 which i dont have.
C. run a th400 w/ a 203 already on it and still find a 205 from a th400.
i currently dont know whats output/input the current combo is in the truck and have a spare sm465 10spline tranny and 205 but tranny is torn apart due to the normal sm465 kick out.
i really like the idea of twin 205s and then having pto abilities as these winchs never fail.
