doubler shifting problems - ORD two stick

[four_by_ken]

OK... searching and think I know... but want to get some confirmation.


I have a two stick shifter I got from ORD with the kit like 8 years ago. Just not sure whats going on with the shifters.

The left shifter is.... ?
The right shifter is... ?


I just dont feel positive engagement. So, I cant tell if it clicks in place. I know I am getting low low and 4wd... just cant really tell where the rest are.

What gives?

 

[sweetk30]

i had this problem with range box on 203 no real detent feel. easy fix http://coloradok5.com/forums/showpost.php?p=2517178&postcount=10

left should be 203 range box and low/n/high
right should be normal 205 4wlow/n/2hi/4hi

 

[four_by_ken]

OK, I was right on the 203 being the left. I am good there. Even with the feel not the best, it works fine.

I am going to do the same you just posted. Where is that hole located?

 

[sweetk30]

directly below shift shaft in to the range box.

and its a tight fit to get all in and plug started but makes it feel just like 205 detents. at least it did on my tripple stick 203/205 setup.

my 203 was so weak it prob would have poped out of gear if the shifter rattled to much at least i think.

 

[mlaux]

directly below shift shaft in to the range box.

and its a tight fit to get all in and plug started but makes it feel just like 205 detents. at least it did on my tripple stick 203/205 setup.

my 203 was so weak it prob would have poped out of gear if the shifter rattled to much at least i think.

Great tip. I did this on my twin sticked 203 today and it feels like a real transfer case now. No more mushy banana stick. You will do some real cussing getting the bolt started with the spacer, but its worth it. If I ever see you in person the beer is on me.

 

[sweetk30]

glad it worked .

i dont drink beer. but use to drink the good stuff but not anymore .

 

[mlaux]

Whatever your drinking....I'm buying.

 

[sweetk30]