Drac module thing question

[454Sub]

Alright, from what I have gathered, there should be 2 jumper wires on the solder puddles and 5 empty spots. Well mine has 5 jumper wires instead, and 2 blank spots. What gives? Im going to assume I should take the instructions that I have for adjusting it and do the opposite. Instead of turning the 2 on and leaving 5 off on the DIP switch, I will do 5 on and 2 off. Is this right or am I missing something?

 

[sweetk30]

http://www.tbichips.com/drac/

 

[454Sub]

I have that page bookmarked on my interwebs. Thats the thing, mines a 91 Drac, but it has more jumper wires than 2. All of them are jumped EXCEPT 2. And its got me all befuddled and such.

 

[sweetk30]

i modify them with switches .

some have more and some have less is all .

 

[eagle mark]

That's how it changes, can be one wire or seven wires.

Have to do the math and figure what calculation, then apply appropriate jumpers.

Here's all the info.

 

[454Sub]

I got it, I was over thinking it by way to far. Just have to solder the DIP switch on and done.

 

[eagle mark]

Get a good one! I bought some cheapies from Radio Shack and they smoked!