driveline angle..

[Xtremegmc80]

i just put everything together on my truck in the rear. but when im looking at the driveline angle, and i do not like the way it looks. need help.. will post pics tonight.

already done to it,

1)4 inch shacle flip
2)2.5 inch blocks
so should i be alright or turn the block around so its shimmed the other way??

 

[readymix]

Are the blocks tapered?

 

[Xtremegmc80]

Are the blocks tapered?

the blocks are shim like. 2.5 in back and like 2.25 in the front of it, should i spin it around to make the angle ok til i buy new 2 inch lift springs for it thur the winter.

 

[readymix]

You need to measure the angles to know weather or not turning the blocks around would work.

 

[gmc4cw]

with your wheelbase and the flip you may need to turn the blocks around. I'm geussing that the pinion is to high? post the pics already.

 

[Xtremegmc80]

pic of angle

heres the angle u can see its way too high,, like toward the cab..

 

[readymix]

That angle looks good.....If you have a CV shaft. If not then you need to get the pinion down.

 

[Xtremegmc80]

That angle looks good.....If you have a CV shaft. If not then you need to get the pinion down.

thanks! no cv shaft for me.. so will turn the block around n see what happens...

 

[gmc4cw]

even for a cv shaft that looks high. turn the block around.