Drivers side rear quarter needed

[riv1973]

Hey all!

So I need a drivers side full quarter panel for our 1988 blazer. I have seen them on desert valley auto for $650 plus shipping. I have been looking for panels from good mark and AMD but can’t find any in stock. Anyone know where I could get one or so I need to get one from DVAP or some other recycler. I am not sure a patch panel for the wheel well area would work.

Any thoughts?

John

 

[ZombieK5]

Hey all!

So I need a drivers side full quarter panel for our 1988 blazer. I have seen them on desert valley auto for $650 plus shipping. I have been looking for panels from good mark and AMD but can’t find any in stock. Anyone know where I could get one or so I need to get one from DVAP or some other recycler. I am not sure a patch panel for the wheel well area would work.

Any thoughts?

John

I have a full driver side quarter panel off of a 1985 that I was going to use on my blazer. I have strip paint down to bare metal. The wheel well has been removed. There is some rusty spots on it that would be easier to patch than welding in major panels. It has a dent on the quarter panel where the crease is located but that could be fixed with Basic Metal repair skills. If you're located near Philadelphia it might be a viable option

 

[ZombieK5]

I also have several of the panels that you are talking about that you cannot find from the metal suppliers. I also have several wheel wells from various salvaged Blazer bodys

 

[Jimmy85]

Here’s a website I recently found. No telling on the quality, but someone has to find out first….

https://raybuck.com/panels/chevrolet-gmc/?query_type_make=or&fwp_make=chevrolet&fwp_model=blazer&fwp_product_category=rust-repair-panels&fwp_paged=2