Was just hoping something I have already would work..
The straight fitting I posted work but I need the 90degree version
The straight fitting I posted work but I need the 90degree version
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Edelbrock carb spacer issue
- Thread starter TJ1978
- Start date
I don't think any of pictured fittings are pipe thread. Maybe the middle one
None of them are, they are all 3/8 straight and fit right into that intake vacuum slot, but I can find 90degree
i went to Lowe’s, Home Depot and ace. I cannot find the 90 degree fitting for the vacuum port between the carb and distributor for the TH350 vacuum line.
any suggestions or links are welcomed..
i went to Lowe’s, Home Depot and ace. I cannot find the 90 degree fitting for the vacuum port between the carb and distributor for the TH350 vacuum line.
any suggestions or links are welcomed..
https://www.summitracing.com/parts/sum-221130
How are you connecting the brake? booster, and hvac vacuum.
How are you connecting the brake? booster, and hvac vacuum.
Booster to back of carb no emission lines
Then the single port is correct. The rib is correct for vacuum modulator.
Is this what your looking for? This is on in original intake manifold on a 1984 305. It was for some emissions crap though, as the truck it came out of is a stick.
Don't they have a pick a part in metro Phenix area? That would be best source
Yes that’s what I’m after..
I need it for the vacuum modulator on the TH350....
I’ll just order from Summit when I have a few more things to get, to justify the $10 shipping they have for everything.
I
I need it for the vacuum modulator on the TH350....
I’ll just order from Summit when I have a few more things to get, to justify the $10 shipping they have for everything.
I
Just to say it, the intake will have tapered pipe thread where the tube nut is straight thread, it may fit but it won't seal.
Most auto parts stores around me have a small selection of brass fittings, the only drawback is most parts people no longer know about thread types / styles so you will need to be able to identify what you need.
If you change your mind I'll pull that fitting off and send it to you. No charge.
I’ll PM you
If you need it quickly, see if O'Reilly's carries this Edelmann fitting - Clampless Fitting Otherwise I think you'll have to stack fittings (90 degree fitting plus a nipple).
urbex
1/2 ton status
1/4 MALE PIPE THREAD X 1/4 BRASS HOSE BARB ELL [17-7904U] : Lasco
Lasco 1/4 MALE PIPE THREAD X 1/4 BRASS HOSE BARB ELL [17-7904U] - Country of Origin: CHINA
www.lasco.net
