What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Electric window regulator problem

T

TBHShane

Registered Member
Joined
Aug 4, 2013
Posts
40
Reaction score
0
Location
Abilene, TX
Long story short.... Back window wasn't working. Switch inside the tailgate was bad, so the motor would only work one direction. Jumped the switch, and motor works both directions. BUT... the gear box on the regulator is stripped out. (Plastic gear inside the metal box is chewed up.) I ordered a new regulator from LMC. It arrived, but it did not have the gear box on it. I called, and they don't include it with new regulators and don't even sell that part separately. Well, that's great.

I'll try a wrecking yard, but that old plastic gear is likely to not last long either. Anybody know where I can get a replacement part for this?
 
oops...I was thinking door window...I fought mine last weekend...
 
Have take mine apart and check it out thanks for the link

Sent from my VM670 using Tapatalk 2
 
I called Summit to see if they could give me dimensions of the various gears they sell. They couldn't. A couple of them do have 9 metal teeth. I need to count the plastic teeth around the outside to see if any of them match up to the Blazer part. I also need the dimensions. I'll try to contact A1 Cardone to see if they can give me that info.

I found this on eBay: http://www.ebay.com/itm/17123824266...id=p3984.m1423.l2649&_sm_byp=iVV65t11FDpnsLss

Kinda ticks me off to see that much price gouging. If I have no other option, I might buy one from him. But I might just convert to manual window anyway.
 
You must log in or register to reply here.

Latest Posts

Top Bottom