CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

electrical harnesses.. 1978 engine..1987 front clip

RootBreaker

3/4 ton status
 Premium
GMOTM Winner
Joined
Nov 29, 2001
Posts
6,998
Reaction score
1,423
Location
Williamstown, NJ USA
Ok so I want to fix my wiring issues... since I have found the problem with under my dash.. still need to fix it but know what it is.. I want to address other areas...
harnesses in our truck are 3 parts...
1. in the cab
2. for engine
3. for front clip..

so I need
2. for 1978 chevy pickup (think 1973-1982)???
3. for 1987 front clip (quad headlights the big full size headlights for low and high beams)
need a price to 08094
can even work out a deal if ya need a towstrap
I am going to attempt to go to the junkyard saturday but doubt I have time so looking for internet assistance.
 
what exactly do you need from the clip? ive got an '86 with duad setup
 
muddybuddy said:
what exactly do you need from the clip? ive got an '86 with duad setup

well if you have the entire wire harness...

the part that runs from the cab (slips into the one with the engine harness and they bolt to the fusepanel in the cab....

so from cab to the headlights, turn signals and stuff...

there is not alot to that harness.... the only reason why I want to replace it is I have a ton of butt connectors holding mine together.... my harness fell into my steering and wrapped itself up.. and got ripped apart...

so I mended it but the connectors are starting to corrode inside.. so replace is not a must but would like to do...
 
it is like this???

rootbreaker_hulk.jpg
 
i gutted a 79 cab and frt clip 350 4 speed truck. i have basicly every thing from cab to engine and 2 head light setup round. if you dont find any at the yard pm me for a super deal. :D
 
the setup i have loks exactly like that, im not sure if the harness is cut or not. ill check and get back to you
 
sweetk30 said:
i gutted a 79 cab and frt clip 350 4 speed truck. i have basicly every thing from cab to engine and 2 head light setup round. if you dont find any at the yard pm me for a super deal. :D

well lemme know a price... I need the engine harness.... and yeah a cab harness..... is your headlight setp for the 79? if so that wont work...

but letme know and total to 08094....
 
sweetk30 said:
i gutted a 79 cab and frt clip 350 4 speed truck. i have basicly every thing from cab to engine and 2 head light setup round. if you dont find any at the yard pm me for a super deal. :D

well lemme know a price... I need the engine harness.... and yeah a cab harness..... is your headlight setp for the 79? if so that wont work...

but letme know and total to 08094....

oh yeah do you have the junction on the firewall? I think it is where the alternator wire goes to????

you can see it here.. above the master cylinder... the red wires are bent through it...

dscf0035.jpg



muddybuddy said:
the setup i have loks exactly like that, im not sure if the harness is cut or not. ill check and get back to you
lemme know...
 
I know where you can get the clip harness. I just sent this truck to the junkyard near me. It is an 87. the harness is good and all there. I was parting this in December. Wish I knew then that you would need it now.

scrap 002.jpg
 
Top Bottom